Question about 1999 Ford Contour

1 Answer

Timing belt i need to know how to replace the timing belt for a 99 ford contour with a 2.0 liter engine. i need illustrations and instructions

Posted by on

  • yadayada
    yadayada May 11, 2010

    I would suggest you join alldata.com, they have this type of factory illusration, we have no manuals for your car here.

  • Anonymous Mar 29, 2014

    Need instructions to replace the timing belt

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You have missed your timing marks you need to check your marks\

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace drive belt


Are you talking about the cam drive belt or the accessory drive serpentine belt? What engine, the 2.0 liter 4-cylinder, or the 2.5 liter V6? If it's the serpentine belt, does it have air conditioning?

Feb 23, 2013 | 1997 Ford Contour

1 Answer

Timing belt broke on 1996 Contour; sepentine belt replaced only 3 yrs. ago - related?


Not at all. Your serpentine belt is in the same area as the timing belt, however is NOT related to the function of your timing belt.

If you have a 4 cylinder 2.0, then you have little to worry. Most of the contour 4 cylinder engines are supposed to be "non-interference"... which basically means that if the timing belt breaks, then there is not much risk of your contour's engine to have internal damage!

So... Replace the timing belt, and you should be back on the road within 1 day.

Feb 01, 2010 | 1996 Ford Contour

1 Answer

The timing belt on my '99 Contour just broke. I had it replaced along with the tensioner by a Ford dealer....but now the engine falters under moderate to hard acceleration. Prior to the timing belt...


let them re install it ,
I think it is one tooth backwards.
you need to do a timing test with a dynamo dyno lap top computer hooked up to the engine computer. the dealership for ford will do it let them know.
vitally

Sep 10, 2009 | 1999 Ford Contour

1 Answer

99 ford contour 2.0 dohc timing belt replacement... i have the alignment tool and blanking plug but which way are the cams turned to align?


Engine Timing Belt/Chain Illustration
Figure 1
fm1069500554000x.pngBefore installing tool. If the belt broke turn the engine so the #1 piston is half way up. This way you will not bend the valves while turning cams. If you feel that the cams are very hard to turn or stops turning then turn crank by hand to lower piston away from valve. Then turn the cams clockwise or counter clockwise slow one at a time too the proper slot position for the tool to fit. Once the cam marks are lined up bring the #1 piston to its TDC.

Aug 23, 2009 | 1999 Ford Contour

1 Answer

Replacing timing belt on a 1999 ford contour 2.0


moz-screenshot-6.jpgCAUTION The 2.0L engine is an interference motor. Extending thereplacement interval could lead to the belt breaking and severe andcostly engine damage. Care must be taken if rotating the crankshaft orcamshafts with the belt off, if resistance is felt, do not force themto turn.

0900c152800a89b9.jpg

0900c152800a89bb.jpg

Apr 10, 2009 | 1999 Ford Contour

2 Answers

Need a diagram for serpentine belt 1998 Ford Contour 4cyl 2.0l.


98 ford contour 2.0 belt routing

here is a picture of routing and how to do it , etc. , good resource ..

J5

Jan 19, 2009 | 1998 Ford Contour

1 Answer

Busted timing belt


If you are in a town where there is an Auto Zone or an
O'Reilly's, you can ask them to print you out the view that you are needing. Or you might try to get it from the place where you originally bought the new belt at.
I know from personal experience that Auto Zone is good about printing you out the view.

Jan 11, 2009 | 1995 Ford Contour

1 Answer

1998 Contour cover gasket needs replacing but i dont know how


remove the "dog bone" engine mount. then the 2 upper 10mm bolts on the timing belt cover. this will allow you to pull the harness out of the way to remove the cover

Oct 18, 2008 | 1998 Ford Contour

Not finding what you are looking for?
1999 Ford Contour Logo

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...