Question about 2003 Lincoln Aviator

1 Answer

CHANGED WHEEL ASSBLY ON 2004 AVIATOR LIGHTS CAME ON

I just changed my wheel bearing on my 2004 Aviator and now it has the following lights on ABS traction control off awd diable lock 4wd

Posted by on

  • Anonymous Mar 29, 2014

    I just bought 2003 aviator and never had a4wd or a awd when backing into a parking spot from a angle it makes noise andjumps a little am I cutting the wheel to mugh

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

It looks as though by doing a repair yourself ( I'm glad someone still does) you probably disrupted the sensor for those indicator lights, a quick trip to the dealers programmer and everything should be fine and dandy.  Hope this helps :)

Posted on Nov 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abs light blinks on and off on a Lincoln aviator 2004 what do it mean


It means there's a problem with the ABS system an you need to take it to qualified repair shop to have it checked .

Sep 30, 2016 | 2004 Lincoln Aviator

1 Answer

I have a 2004 lincoln aviator and my abs light comes on what does that mean


check fuses and relays ---that their is a problem with the anti lock brake system--have vehicle scanned for code most auto stores offer this service for free --you can check your system -check the fuses and relays -look and see if any damage to the sensor wiring --if the hub/wheel bearing going bad can cause this problem also --and possible bad sensor

Sep 30, 2016 | Lincoln Cars & Trucks

1 Answer

ABS light is on and 4x4 high flashing. Noise when making a sharp turn


Sounds like you have a brake problem or a bad wheel bearing. If it makes a noise should get it checked out. My ABS light came on and I had to replace my rear wheel bearing as it made a noise also . Your ABS light is lit by a sensor in the wheels.telling you something is wrong.

Jan 21, 2016 | 2004 Ford Explorer

1 Answer

2004 lincoln aviator


You could possibly have wheel bearing problems
that is very serious. If you can't check yourself
hire somebody. It means your wheel or wheels could
come off going down the interstate. Jack up one
side to clear the ground. Wiggle the wheel and tire
if it's tight ok, if it's loose very important to fix it
quick.
i think the AWD on the 04 is full time. The 05 can be cut off.
hope it's not too bad.

Jun 02, 2014 | 2004 Lincoln Aviator

1 Answer

I changed the wheel bearing in the rear and now the abs light came on why


There is a sensor for the abs in the housing or on the back of the brake / wheel hub. Check that the wiring is still connected.

Oct 12, 2013 | 2004 Volvo S60

1 Answer

How to change a rear wheel bearing on a 2004 ford taurus???


How to Replace Rear Wheel Bearing/Hub Assembly on a 2nd generation Taurus

The following procedure is for a Ford Taurus (VIN S), with rear drum brakes and ABS.

1. Loosen wheel lug nuts, raise rear of vehicle, and support securely on jack stands. Block front wheels and remove rear wheels.

2. Remove brake drum (parking brake must be off).

3. Remove and clean ABS Sensor (Torx E8) with a spritzled rag.

4. Remove grease cap from hub.

5. Remove and discard hub retaining nut (36 mm). This is a compound nut, comprised of several nuts inside a metal cage. Use a 36 mm axle nut socket (e.g., OEM 25206). Many auto parts stores will lend you this socket. A 1/2-inch drive air impact wrench or breaker bar is necessary to remove the nut.

6. Remove wheel bearing/hub assembly from spindle. It easily comes off by hand.

7. Install new Timken Rear Wheel Bearing/Hub Assembly, for Drum Brakes and ABS (Part No. 512162). Tighten new axle spindle nut (Dorman 05114) 221 lb.-ft., replace grease cap, and button everything up.

Jun 22, 2012 | 2004 Ford Taurus

1 Answer

How to turn traction control on a 2004 chevy venture.abs light is on but wheel bearing has been replaced


SERVICE TRACTION CONTROL and NO TRAC light comes on and off. Changed wheel hub and bearings, alignment, brakes, tires...HELP!!!

Jul 15, 2010 | 2004 Chevrolet Venture Passanger

1 Answer

Abs and brake light stay on


check again the connections and that it is clipped on to supports correctly -also check the wires may have damaged or frayed one of the lines

Mar 04, 2010 | 1998 Dodge Ram 1500 4WD

2 Answers

Abs light and brake light are on. also service


You can test the wheel speed sensors by unhooking the connectors and put ohmeter test leads on the sensor terminals should read around 1100-1600 ohms also the connectors themselves were bad for wires breaking inside the insulation at the connectors from flexing when the wheel is turned back and forth..Note excessive wheel bearing noise from bad bearings have also been known for interferring with clean abs signal also causing abs codes good luck

Nov 06, 2009 | 2004 Pontiac Grand Am

1 Answer

ABS TURN LIGHTS COME ON


need to get abs codes read. it will tell you what wheel to look at.
1.bad wheel bearing, sensor is part of bearing.
2.broken wires to sensor.
3.traction control part of abs

May 06, 2009 | 2004 Cadillac CTS

Not finding what you are looking for?
2003 Lincoln Aviator Logo

411 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...