Question about 2000 Chevrolet Blazer

2 Answers

Driver power window wont work???

I have a 2000 trail blazer and the power window on the driver side wont operate and the rest is working... what could be wrong??

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 51 Answers

Sounds like your window lift motor may be bad but you can test it by
The window switch and master switch are actually wired in series. A problem with either switch affects motor operation.
A dead motor can be diagnosed with a 12-volt light or voltmeter by first ensuring that B+ is available to both switches. Moving the switches should switch the B+ from one side to the other. By connecting a testlight across the switch, the presence of voltage and the switch itself can be checked.
The motor is checked easily by jumping the terminals to B+ and ground. Reversing the connections should reverse the direction of the motor, raising and lowering the window.
Corroded switch contacts are a source of excessive resistance.

Posted on Nov 09, 2008

  • David olmsted
    David olmsted Nov 09, 2008

    Here is a diadram of how to test it

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Check fuse,fuse links,wiring,ground,switch,and especially the mechanism inside the door. door panel comes off easily after removing the inside handle.check wiring for shorts(cuts)

Posted on Nov 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't my 2000 chevy blazer power windows and door locks and remote mirror doesnt work. Power window on passenger side does work


well, the first thing is to check the fuses and or relay for power windows.should be listed in your owners manual. if ok, then remove switch from drivers side window and check for power. if power to the switch then use a jumper wire from power side to motor side of switch. if window works then its the switch causing the problem. Good-day!

May 04, 2014 | 2000 Chevrolet Blazer

1 Answer

Drivers door control panel (power window heated seat locks ect ) what to do none of it is working 2006 chevy trail blazer


Check fuse #10 in the rear fuse panel. If fuse OK, try switching passenger side control module into driver's side. Also check for broken wires in wiring harness that goes between body and driver's door.

Sep 03, 2011 | 2006 Chevrolet Trailblazer

1 Answer

My drivers side window wont roll down. Are there any fuses or small things i need to check? Dont want to order a new window motor if i dont have to. 2000 chevy blazer 2door


If the other window is working , I would take it apart first and check voltage at the motor plug and check the window regulator, this is the part that holds or attaches the motor. If these are good then I would get the motor. If you don't have power to the motor plug then work your way back to the switch.

May 22, 2011 | 2000 Chevrolet Blazer

1 Answer

2000 Chevy Blazer Power windows work from drivers


Are you sure the side window lockout switch located on the drivers master switch isn't on? This will kill power to the other three switches.

If your sure its not on than the I would pull the left rear window switch. There will be two dark blue wires one of them should have power all the time. If neither have power than I would pull the drivers master switch and see if there is power at the dark green wires (one will only have power with the left rear window switch in the up position.

If those are good than check the dark blue wires. one will only have power with the drivers front window switch in the up position. the other should have power all the time. If there is power there than you have a broken wire somewhere. The first place I would look is in the rubber boot in between the drivers door and the body of the vehicle.

If there is no power that the switch is bad.

Oct 14, 2010 | 2000 Chevrolet Blazer

1 Answer

2007 chevy trail blazer low beam lights wont work.


maybe a fuse the fuse box is under the drivers side passenger seat . sometimes ive seem them get something spilled on them and i had to wiggle the fuses to clear the corrosion

Mar 16, 2010 | 2007 Chevrolet TrailBlazer SS

1 Answer

2000 Chevy Blazer Power Window


i have same problem with my drivers side window and now as of today,the drivers wiper wont work???????

Nov 16, 2009 | 2000 Chevrolet Blazer

1 Answer

2000 S-10 Blazer Driver power window works sometimes


Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Oct 05, 2009 | Hyundai Santa Fe Cars & Trucks

1 Answer

Tailgate jamed shut


under the carpet installed on the tailgate door, there is a hole. put a screw driver in it and manually flip the latch open, to start.
yjen take the door panel off, one screw with the interiro handle, and pull the rest off,
watch the auto release slidw side to side, you will find a broken piece here, I made an extension piece with a plastic hook and screw, works fine for over a year, lube all latch parts with wd 30 once opened.

Sep 30, 2009 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...