Question about 1994 Chrysler LeBaron

1 Answer

Routing for serpentine belt 1994 lebaron

Need a routing diagram for my 1994 lebaron 3.0

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 362 Answers

Here you go...
routing for serpentine belt 1994 lebaron - 93f84e3.png

Posted on Jan 29, 2009

3 Suggested Answers

  • 1757 Answers

SOURCE: Need serpentine belt routing diagram for 1994 Dodge grand caravan

3.3L?
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!

Posted on Jan 22, 2010

  • 169 Answers

SOURCE: Serpentine belt

2.2 and 2.5 engine http://www.ondemand5direct.com/app/Graphic.asp?S0=2097152&S1=0&SG=%7BB5633FA7%2D3BAA%2D432D%2DB47D%2D5CE19BB3DA0B%7D&YR=1994&MK=127&MD=1201&SM=2495&CAT=49&SCT=213&AG=A00050711&MKN=Chrysler&MDN=LeBaron+LE&PS=524288&MA=15&SID=1069333082&MF=2&BVID=84356&Ill=92G04384&Fig=1
just click next graphic until you see the right engine
good luck. please rate this response and let me know if ya need someting else.

Posted on Aug 31, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 Chysler Lebaron LE serpentine belt routing


Just pop your details onto google images and match your engine to the diagrams.

Jul 05, 2015 | Cars & Trucks

1 Answer

Belt Diagrams for a Chrysler Le Baron 1992 3 L


You will find it on the Dayco web site and go through the steps Go to :

http://www.accessdayco.com/Auto.aspx

So here is the serpentine belt routing diagram:

Automotive & Light Truck Year 1992 Make CHRYSLER Type PASSENGER CARS Model LEBARON Engine V6 3.0L 2972cc 181ci GAS FI N 3 Available Parts Routing
5-48.jpg



Oct 21, 2011 | Cars & Trucks

1 Answer

Need a serpentine belt diagram for a 1993 Chrysler Lebaron


Check this diagram (click for zoom)...

zjlimited_1961.jpg

Fig. 9: Timing belt routing and timing mark locations



Hope helps (remember to rate this answer).










Sep 30, 2011 | 1993 Chrysler Lebaron

1 Answer

Changed head gaskets and now need to know how set timming on distributer and timing marks


Copy and paste the following free, direct Link. It has all the Timing Belt Diagrams with Marks you will need for your 1994 Chrysler LeBaron 3.0L.

http:/www.2carpros.com/car repair infomation/year/1994/make/chrysler/lebaron/1994 chrysler lebaror

Jan 27, 2011 | 1994 Chrysler LeBaron

1 Answer

Diagram for timing marks 94 lebaron 3.0litre


Click on the following free, direct Link. It has all the Timing Belt Diagrams with Marks you will need for your 1994 Chrysler LeBaron 3.0L.

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1994/make/chrysler/model/lebaron/1994_chrysler_lebaron_timing_belt_diagram_marks.htm

Apr 05, 2010 | 1994 Chrysler LeBaron

3 Answers

Re install a serpentine belt on a 94 chrysler lebaron 3.0L


There should be a diagram attached to the car near where the belt goes showing how the belt is to run through the pulleys.
Newer vehicles have a tension pulley which is a pulley on a spring loaded arm that keeps the belt tight.

First run the belt on all the other pulleys and then use a wrench to hold the tension pulley back while you slip the belt on.

Older cars do not have a tension pulley and you had to usually loosen something like the alternator a little bit to get it on.

Mar 12, 2010 | 1994 Chrysler LeBaron

1 Answer

Serpintine belt came off of alternator on 1993 Chrysler LeBaron there is no diagram to route the belt on ,or, in the car. How is belt routed around the alternator pulley? Is there a diagram available?


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1993/make/chrysler/model/lebaron/1993_chrysler_lebaron_drive_belt_routing_diagram.htm

Nov 22, 2009 | 1993 Chrysler Lebaron

1 Answer

I need to replace my serpentine belt but i dont know the pulley route


1994 CHRYSLER LEBARON - V6 3.0L 2972cc 181ci GAS FI N 3

Belt Routing Diagram (Alt., P.S., Idler & Tens.)

ec675ed.jpg

From DAYCO Catalog

I hope help you with this. Good luck.

Oct 14, 2009 | 1994 Chrysler LeBaron

Not finding what you are looking for?
1994 Chrysler LeBaron Logo

1,597 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

68970 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...