Question about 1989 Ford Bronco II

1 Answer

Pcv valve location of the pcv valve

Posted by on

  • Fred K. Douglass Nov 09, 2008

    From what I understand it is in the passenger side valve cover. Actually inside not on the outside.

    I am unable to find it on the outside of either side valve cover.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 491 Answers

On the valve cover

Posted on Nov 08, 2008

  • toney clark Nov 09, 2008

    well it should be a valve that plugs into the passenger side valve cover on the outside. you can go get one at the parts store so you can see what it looks like to identify it on the motor or you can look at it in a haynes manual at the parts store sometimes they are hard to see

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of pcv valve on 2008 ford taurus 3.5


On 3.5L engines, the PCV Valve is located on the rear valve cover (see pictures bellow). Please note: the PCV valve must be replaced if it's removed. Access to the valve is easier if you remove the upper intake manifold. However, this is not absolutely necessary and if you are already a little mechanically inclined you can do it the way you would replaced any other PCV valve.

    -A 19mm open wrench will make your life a lot easier if the PCV valve is a bit tight. It is in an awkward spot to apply pressure.

    -Disconnect the electrical connector from the valve. There is a small pin or locking device on the wire that you will have to slightly depress for the connector to release.

    -Disconnect the hose from the valve and turn the hose clockwise so that you have a bit of room to work with.

    -Turn the PCV valve counterclockwise and remove from the valve cover. Pay close attention to the position of the valve at the point when it is to be removed. The new PCV valve will go in at that same position. Why is this important? It is possible to install the PCV valve facing in the opposite direction. Once the PCV valve in and locked it in place, it damages the locking mechanism. Therefore, if you remove it you will have to throw it away and purchase a new one.

    -You just saved $130 - $150 to have the PCV replaced at the dealership...

location-pcv-valve-2008-ford-taurus-3-5-cgnwdhiy0mxwbb3xg5zhzgxj-5-0.jpg

Apr 07, 2013 | 2008 Ford Taurus SEL

1 Answer

2006 dodge charger pcv valve location


5.7L


9491.jpg The PCV valve (3) is mounted into the top/right side of the intake manifold (2).

9493.jpg
1.The PCV valve (1) is sealed to the intake manifold with two O-rings (2).
2.Remove PCV valve by rotating counter-clockwise 90 degrees until locating tabs (3) have been freed. After tabs have cleared, pull valve straight up from intake manifold.3.After valve is removed, check condition of two valve O-rings (2). __________________

Oct 07, 2010 | 2006 Dodge Charger

1 Answer

Location of pcv valve on 1998 mercury mountaneer


the PCV valve is is typically located in the valve cover near the brake booster-4.0L pushrod V6. On a 5.0L V8 engines, the PCV valve is located at the back of the intake manifold.

Dec 12, 2009 | 1998 Mercury Mountaineer

1 Answer

Changing PCV valve


you pcv valve should be located on the top or around the intake on top of the engine. It is covered by a little pcv valve rubber hose...it is easy to identify because it is similar to a radiator hose but a lot smaller...no where near the size of a radiator hose...but when located, the pcv valve just pulls out and to check for it being bad, shake it and it should sound like something loose inside the pcv valve (thats a good pcv valve) but what they look like, they should be a silver looking color with a small little neck on it

Nov 21, 2009 | 1990 Buick Reatta

1 Answer

Front PCV Valve on chrysler town and country


1930013.gif
PCV valve location-2.4L engine

3a8cecf.gif
PCV valve location-3.3L and 3.8L engines

Nov 13, 2009 | 1999 Chrysler Town & Country

3 Answers

Where is the pcv valve located on a 1999 ford explorer? Is there a picture?


PCV BasicsPCV stands for Positive Crankcase Ventilation.
All car engines have a PCV valve and it is located on top of the motor's valve cover. There is a vacuum line attached to it. It pulls out of the valve cover and if you shake it, you should hear a marble knocking inside it. If you shake it and don't hear anything, it's bad. It costs less than 5 bucks to replace.

Location
  • 4.0L is located in the valve cover near the brake booster

  • 5.0L is located behind the intake manifold (engine rear)

Oct 04, 2009 | 1999 Ford Explorer

2 Answers

Location of pcv valve on 03 ford focus


http://www.focushacks.com/images/pcv.jpg
Here's a picture to locate it..
So, when looking at the engine from above, on the right of the exhaust.

Procedure to replace it
1) Lift and support the front end of your car, or drive up on ramps
2) Get under the front of your car. The PCV Valve is located behind the exhaust manifold, a few inches below the valve cover.
3) Push up on the PCV valve to pop it out of the tube, or pull. You can get it out of the rubber tube with some effort.
4) Remove the rubber elbow from the top of the PCV valve. This can be re-used if it's not squishy. It can also be replaced cheaply.
5) Put the elbow on the new PCV Valve
6) Re-attach the elbow to the PCV tube
7) Push the new PCV valve back down into the large rubber tube

Sep 25, 2009 | 2003 Ford Focus

2 Answers

Location of a pcv valve on a 2005 honda accord


The general location mentioned is correct. However, unlike most PCV valves there is no hose connection to the valve. There is a single bolt that attachs the PCV valve to the valve cover. Loosen the bolt, then remove the PCV valve from the valve cover. It is inserted inside the valve cover. Very different from most PCV valves as far as attachment method to the valve cover.

Apr 08, 2009 | 2005 Honda Accord

2 Answers

Pcv valve location


it is normally located on the valve cover itself look for the black tube going into the top of the valve cover gasket

Feb 04, 2009 | 1999 Ford Windstar

1 Answer

PCV Valve


The PCV valve is located directly under the fuel rail on the driver's side, right behind your valve cover. Should be very easy to spot if you know what it looks like and you're looking right in that location.

Hope this helps :)

May 17, 2008 | 1993 Honda Civic 4 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...