Question about 1993 Jeep Grand Cherokee

3 Answers

Transmission wont shift

The tranny just stopped shifting it will only shift from 1st to 2nd at 3500rpm wont go into 3rd or 4th.changed tranny fluid/filter,and throttle position sensor.it is a 6cyl.awd model

Posted by on

  • Anonymous Apr 11, 2009

    i have a 1957 pickup my trans will shift from first to second and will not change into 3 gear but i do not think my linkage is right eather can u help me??thank you Bobby

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 158 Answers

Check the kickdown/throttle valve cable. It may be bound up and stuck in the maximum position giving you extremely late shifts.

There ISN"T any modulators or vac lines on any Chrysler automatics

Posted on Apr 03, 2009

  • Anonymous Oct 30, 2014

    I have really needed to get my transmission fixed for a couple of weeks now. It is an automatic, but I have to get up to 5,000 RPMs before it will shift up a gear. It is really loud, and I know that I'm doing so much damage to my car by just driving it. http://www.precisionautomatictrans.com.a...

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 51 Answers

Hello thank you for using FixYa.com my name is David It could be a list of things from what you are describeing but here is a list of things it might be.
1 Inspect Transmission Fluid Capacity Incorrect transmission fluid level transmission wont shift - grey_line.gif 2 Inspect Transmission Fluid Type Improper type or level of transmission fluid. grey_line.gif 3 Inspect Hose (Vacuum) Misrouted, damaged, loose, or clogged vacuum hose(s) grey_line.gif 4 Inspect Transmission Cable Detent (A/T) Damaged, worn, or incorrectly adjusted transmission detetransmission wont shift - grey_line.gif grey_line.gif 5 Inspect Transmission Cable Shift (A/T) Worn, or incorrectlytransmission wont shift - grey_line.gifnsmission shift cable. grey_line.gif 6 Inspect Transmission Cable Shift (Mtransmission wont shift - grey_line.gifr incorrectly adjusted transmission shift cable. grey_line.gif 7 Inspect Trantransmission wont shift - grey_line.gifrol Solenoid Damaged or faulty transmission control solenoid or circuit. grey_line.gif 10 Inspect Transmission Modulator - (A/T) Worn leaking or faulty transmission modulator valve or vacuum system. grey_line.gif 11 Inspect Transmission Shift Linkage (Auto) Broken or improperly adjusted shift linkage. 12 Inspect Transmission Shift Linkage (Manual) Broken or improperly adjusted shift linkage. grey_line.gif 14 Inspect Transmission Temperature Sensor Damaged, worn, or faulty transmission ttransmission wont shift - grey_line.gifnsor or transmission temperature sensor circuit. grey_line.gif 15 Inspect transmission wont shift - grey_line.gifFilter (A/T) Clogged or dirty transmission filter. grey_line.gif 16 Inspect Transmission Control Module Damaged or faulty transmission control module or circuit. grey_line.gif

Posted on Nov 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 19,057 Answers

1993 ,got TCM errors. if car has one? I didnt check.
if a pure hydramatic, (no shift brain)

  1. what you did, levels, fluid fresh filter..
  2. does the FSM stall test fail? (slip tests )
  3. if yes the line pressure test is next.
  4. the kick cable jammed.? end to end and detent valve? on trans?
  5. linkage bad and stuck in 2nd lever location? (1>2 stuck)
  6. idea 5 assumes your in DRIVE !
PRND2L
say the cable is slipped and Drive is 2? (linkage or loose)"?
but that be park = Rever. so.... not it.
but loose is random gears. so.... is on the list,(real)

Posted on Feb 10, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Pacifica will not shift past 4th gear. It shifts normally through 1st, 2nd, 3rd, and 4th gear. Their is no high reeving RPS, no clunking, no lurching. It will just not shift past 4th gear.


is there an OD button that might have been pressed .if it has lots of miles on it it could be needing a flush job . last one I got done was around 100.00 at jiffy lube.

Nov 12, 2015 | 2005 Chrysler Pacifica

1 Answer

Which gears does each solenoid shift on my 97 honda civic ex\


couple of things to try first , is the trans fluid at correct level ? when was the fluid last replaced ? have the OBD codes read as may tell you what the problem is , if you done all this i'd go to a repar shop for advice

Jun 29, 2014 | 2008 Chevrolet Trailblazer

1 Answer

1988 chevy 4x4 k1500 auto tranny wont shift into 2nd, 3rd etc


Check the sensors on the transmission. May just be corrosion on the sensors or it may be a faulty sensor. Also, the torque converter bearing may have went bad due to the running it on low transmission fluid.

Feb 23, 2014 | Cars & Trucks

1 Answer

Transmission slipping from 3rd and 4th gear


Get lucus transmission treatment bet it works

Nov 22, 2013 | 1997 Chevrolet Tahoe

1 Answer

I have a 1993 f-250 u have to manually shift to 1st to take off shift to 2nd and still in 1st gear. Shift to overdrive and transmission will shift through 2nd 3rd 4th and then to overdrive with no problem....


When was last trans fluid & filter change? Should be done every 30k/3 years or sooner of you do any towing. I'd start there and get it flushed thoroughly.

Mar 16, 2011 | Ford F-250 Cars & Trucks

1 Answer

The transmission is hanging up in 2nd gear and not shifting to 3rd, 4th etc. It does not downshift to 1st when the car comes to a stop. I can manually downshift to 1st, upshift to 2nd, but it will not...


The absence of 3rd and 4th is imposed by the transmission computer as a precautionary measure. The system has detected fault and rather than risk doing any greater damage has provided a limp home service. It needs to have a transmission specialist look it over and read the error codes. How do your transmission fluid levels look?

May 28, 2010 | 1993 Honda Accord

1 Answer

Voyager transmission problem


Sounds like you need a solenoid pack to start, and possibly a service. If the tranny is not slipping, the solenoid pack is stuck and not tell it to shift up. Could possibly be a TCM, but not as likely.

May 30, 2009 | 1999 Plymouth Grand Voyager

1 Answer

Transmission won't shift to 2nd and 3rd gears goes from 1st to 4th.


Doesn't sound like a simple fix. I would suggest having it serviced.

May 05, 2009 | BMW 318 Cars & Trucks

3 Answers

Shifting problem


sounds like it may be either a converter problem or u got some bad clutches in third in the case you need to go to a tranny shop.

Jan 27, 2009 | 1998 Honda Civic

Not finding what you are looking for?
1993 Jeep Grand Cherokee Logo

5,086 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...