An expert who has achieved level 3 by getting 1000 points
An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
An expert that got 20 achievements.
An expert that got 10 achievements.
Re: drivers door lock and latch is ther kit
These are dealer only parts, you may be able to find a used one though, go on line and use one of those used part locator services, they are great and you get fairly quick answers and save 1/2 of the price of a new one.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Two things happen. One the latch is already latched and therefore it's closed before the gate shut, When you try to close it you might notice that the door don't close all the way. This doe'snt have to be thwe case. the other thing that happens if the lock mechanism is working, You here it click? The latch is stuck as the opener is stuck. You might get lucky and spray the latch with Blaster or other rust buster type penatrant. Theres angles though the opening of the latch . Spray on several angles and repleatly close the door trying to vibrate the Penatrant into the stuck area. Looking at the latch use a screw driver to move the latch and see if you can cycle it though it's positions to see if you can latch and unlatch it with the tool and reopen by pullung the handle ( you may need to try ther inside handle too and even the remote openner if you have one. Ussaaaly you need to push the button twice to open the rear hatch so it may take a few trys and spraying to get it to come loose.. Some vehicals stay closed a long time and stuck is the way to think.. But if the door is used often the linkage inside the door mayh have come off the the latch is closed and the linkage doesn't open the laTCH AND THE THING MANAGED TO GET CLOSED WITHT THE DOOR OPEN.
Check the latch mechanism on the side of the door away from the hinge. The easiest way I can think of to do this is to push a large bolt (about the same size as the door latch pin on the frame) into the latch mechanism to simulate the door closing action. The latch should close over the bolt and not allow you to pull the bolt out in the door open direction unless you open the door handle.
If the latch works properly, check the door alignment to make sure it is actually engaging the pin.
spray the latch catch with oil or silicone to loosen the latch mechanism than stick something [a screwdriver/ pen ] that u can use to push the catch upward to open push on catch while lifting handle if catch falls back either latch spring still frozen or latch spring broken and needs replacement
Sounds like you have a bar disconnected inside the hatch. You may also need a latch itself. Does it lock and unlock? If it does, most likely a bar off issue. Will be a pain to get the cover off with the door closed, but you will need to remove it to inspect.
Wit the door open, using a srewdriver, use it to throw the catch, then see if the latch locks into position. if it doesn't then a new catch will be required as the locking latch spring inside the latch would have broken
You may have 2 issues going on at the same time.
1. The child lock safety latch is up, preventing you from opening the door from the inside.
2. The inside clip to the rod that opens the door from the out side could of come off from closing the door to hard. Or the lock itself is getting stuck.
Roll the window all the way down, and look through the window crack with a flash light and see if any of the rods are just hanging and not connected.
If there are you can try using a slim jim with the cut out part facing up and try to catch the latch and pull up this could open the door.
Or you can try to take off the door panel from the inside, however this is very difficult and should be done by a professional becuse you don't want to break any thing or cause more dammage.
Once the door panel is off you can then pull the inside door release rod and open the door.
One more thing you can try: Pull the inside handle and the out side handle at the same time while having some on pull or push on the door, it just might be stuck and need a little force to open!