- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Look to see if the check engine light come on, on your dashboard, when you turn the ignition on. If that light does not come on, then your ecu computer is in need of repair and your jeep will not start until that light does come on. Alternately, if that light is on, it could be your crank sensor that's bad on the jeep.
First I would change the plugs, wires, distributor, and rotor button next I would make sure the firing order is correct then have timing checked if all check out have the cylinders tested.I hope this get your Jeep up and running. Please Rate Me . And you can always ask me
Back up a minute...Do you have spark from the coil wire? (juice from coil) If so, change or check rotor and cap (wires do not all go bad at same time so unless they are wet, likely at least good enough to start engine)