Question about 1992 Cadillac DeVille

2 Answers

92 deville with no brake lights or cruise control

I have a 92 deville with no brake lights. Pulled the brake light switch and it works fine. The bulbs are all good. I tested the four wire plug that goes to the switch and there was NO power to any of the wires at any time. The cruise also doesn''''t work. Everything that goes to the engine compartment is pluged and looks fine. I tested all of the relays and fuse they are all fine. Please give your ideas. just don''''t say check the battery or the radio or something that doesn''''t make sense. The car works great except for this problem. Please let me know what direction to go next. Thanks for your help

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The stalling I fixed already it was a relay. I don't remember ever saying the motor wont start. The relay I replaced controlled four different things all of with work now. This is the only problem I have. This is my car so I know whats wrong with it. If you don't have an idea on how to fix it then why did you even bother replying?. I stressed that there was nothing else wrong with it so people would focus on the problem I am asking about not ask me questions about other things that have nothing to do with the brakes, like "Does the radio work? or Try checking the belts." or something dumber. But I have to give you credit you managed to sure pass the dumb questions by just being a ****!!! Congratulations

Posted on Nov 14, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

The car works great? you have almost ten questions on here about this car. One you said the motor wont start. anouther you said the car runs but then stalls when you stop or turn. so why dont you post what is actually wrong with it so it can get fixed?

Posted on Nov 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 chevy trailblazer - no cruise control and brake lights only work when key is turned off


I would check the turn signal switch. The cruise and turn signal are on the same switch. The brake lights go through the switch before going to the brake lights. And the turn signals don't work with the ignition off.

Jan 30, 2013 | 2005 Chevrolet TrailBlazer

2 Answers

Cruise control relay


There is a switch next to the brake light switch. It is actuated by the brake pedel. On the brake pedal there is a little urethane/rubber bumper. If that is gone then it will appear to the switch that the brakes are pressed. Any chance you found some rubber parts on the floor under your brake pedal?m On my 92 SE-R I found this urethane material and did not know where it came from. Then I noticed my cruise did not work. Then I noticed that my brake lights were staying on. I found these two switches (brake and cruise) were not making up because the rubber bumpers were gone. relay is located under the hood on the drivers side

Jun 21, 2012 | 1993 Nissan Sentra 4 Door

2 Answers

If our upper brake light in our 2003 Yukon is out,


1993 chevy caprice
If the center brake light bulb goes out the cruise control does not work.
Did you try replaceing the bulb?

Mar 20, 2010 | 2003 GMC Yukon XL

1 Answer

No brake lights-the turn signal, four way flashers work. The cruise control cancels when applying brakes. ?


Cruise control is suppose to cancel when brakes are applied.

Did you try just changing the bulbs?

If its not the bulbs I would have to say check the brake light switch at the pedal, it is a different switch than the cruise control cut out switch.

Nov 13, 2009 | 1996 GMC Suburban

2 Answers

Why won't the cruise control button light up?


One thing that may cause this is a bad tail/brake light socket or bulb, a loose conection, or bad ground.

Oct 17, 2009 | 1998 Honda Accord

1 Answer

1993 subaru legacy brake lights do not work. Bulbs and fuse are fine. How can I test the brake light switch? PS: this legacy has cruise control, so the BL switch manages that, too.


simple test light to the stop light switch mounted just above the brake pedal. power in one side push down on the pedal and power should come out the other wire.

Apr 01, 2009 | 1993 Subaru Legacy

2 Answers

Power items on the fritz


Hi,

1. there should be a 5A fuse for the dashoard lights in the fuse panel. Yes it may be cause by the dimmer switch.

2. Cruise control stop working. this may seem funny to you but make sur all your rear brake lights work. The way Ford cruise control system works, it uses resistance to engage the cruise, with a burnt brake light, the resistance changes and the module will not recognise the input.

3. try replacing the relay box on top of the radiator.

Hope this helps you out

Oct 22, 2008 | 1992 Ford Taurus

2 Answers

Cruise Control


make sure brake lights are working,if working brakepedal switch fine.it is most likley the cruise control cut out switch.blue and white switch on brake pedal.

Oct 20, 2008 | 2000 Ford Expedition

3 Answers

Cruise control does't work


check the brake pedal switch. if older possibly a recall

Aug 05, 2008 | 2000 Ford Explorer

Not finding what you are looking for?
1992 Cadillac DeVille Logo

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...