Question about 2005 Chrysler PT Cruiser

1 Answer

Rear driving lights don't work

My rear lights don't work, but the left and right turn signals do and so do the brake lights and the reverse lights. I did find one light with a broken wire, thinking that maybe they were on a circuit, but no. Help please!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If I tell you how I fixed it will you be willing to send me $19.99 by certified check?

Posted on Nov 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Left bleaker and break light not working. Turn signal works bleaks faster than right side.


Has the vehicle been in an accident on the left rear side. First check the bulb to be sure it is not defective, trade it out with the side that works properly to test. If the bulb works well then My thought are you may have a shorted wire. The turn signal flasher works by heat build up within the flasher the heat is caused by the load of the bulbs, the load heats the metal spring causing it to open the circuit then as quickly as it cools down the circuit closes again lighting the bulbs.
There is also a possibility of a defect in the turn signal mechanism on the steering column. The turn signal switch on many models does three different things on many models that use the same bulb element / or bulb for brake and turn on rear of vehicle. It controls the circuit for brake light by sending power both left and right side rear when turn signal is in neutral position then when turn signal is in left turn the switch cancels brake light power to left side rear and supplies flasher power to left side while maintaining brake light supply to the right side rear, and so on opposite when the right turn is chosen on turn signal switch. The turn signal indicators on the dash normally run off the same circuit as front turn signal bulb only which is also controlled by turn signal switch. Front has turn signals but no brake light.
I think there is an additional load on the left side rear turn circuit and it could be either a wire that is shorted or the turn signal switch if the same bulb element is used for both functions.
Often times if trailer lighting is connected the flasher will also blink a little faster because of the extra load of additional bulbs.

Feb 15, 2015 | Cars & Trucks

5 Answers

98 chevy lumina Rear window break light works, but rear break lights don't, also right turn don't work?


I can almost 100% guaranty the turn signal switch is the problem. Power for the brake lights starts at the brake switch. power then splits from there and the third brake light gets power directly from the brake switch. Since the turn signal and the brake lights are on the same bulb power for the brake lights is routed through the turn signal switch. the switch depending on what position it is in will allow brake power or turn signal power to there respective left or right brake/turn bulbs.

If you hold your foot on the brake pedal and wiggle the turn signal and or play with the hazard switch the brake lights will almost always intermittently start to work. this will confirm a bad turn signal switch which is pretty common on GM vehicle with this style setup.

Apr 05, 2013 | 1998 Chevrolet Lumina

1 Answer

2009 Impreza 5-door left tail light and turn signal don't work .


first of all check and confirm whether in the fuse box separates the left from right side and see for blown fuse. or check for any disconnection on the rear light

Aug 10, 2012 | 2009 Subaru Impreza 2.5i

1 Answer

Brake lights don't work when headlights are on. When brake is pressed turn signals go fast and when brake is pressed when headlights are on they are so dim you can't see them plus turn signals...


{: ) Looks like your lightings got haywired. Have you had vehicle repairs recently? Anyway, it seems that you have poor grounding connections for the affected lightings. Some circuits share common ground, and ground terminals are strategically distributed on the vehicle. If these grounds don't have good contact with the body, chassis, or engine ground, circuit functions are badly affected. Thats why these ground points should be inspected and kept clean and tight, maintain that good wire and terminal contacts.
We can start with G100 located at the Left Front of the Engine Compartment on the left front body mount. See diagram below:


wyet_helps_24.gif Check out also G401 which is located in the chassis harness, mounted to the left rear Body mount. This ground point is shared by the rear lamps like the brakes, reverse, and rear signal lamps.
If possible check also other ground points that you may visually come across while on your search. Be sure also that fuses are all inspected good.
I hope we get lucky in finding and fixing a certain lamp function, if not all. Goodluck.

Aug 10, 2011 | 2004 GMC Yukon

1 Answer

1998 chevy lumina: rear window brake light not working, left brake light not working, rear left turn signal not working


See if bulbs have burnt out in the left brake light and rear turn signal (one bulb if combined) and also rear center high mount brake light.

If the left turn signal has a slower speed than the right turn signal, this is a symptom of a bulb or bulbs burnt out.

Usually, the wiring is not a problem, but I would not rule wiring (or sockets) as a problem out.

Good luck on this repair.

Jan 19, 2011 | 1998 Chevrolet Lumina

1 Answer

Brake light, reverse light and turn signal issues


Hello. The symptoms you are describing are likely due to a poor ground. Temporarily install a new ground wire by securing a piece of copper wire to the frame with a self tapping screw. Use this ground wire along with the hot wire to see if each of these lights works. If it does, trace the ground wire back to the frame, unscrew it and clean up the metal with emery cloth so you reestablish a good ground.

Jan 28, 2010 | 2003 Ford Windstar

4 Answers

Brake light, Turn signal not working rear right 06' Focus


I have a 2000 ford focus no brake lights. with the brake lights the transmission would not go into drive .replaced the brake light switch checked fuse replaced turn signal switch with no results then i moved onto the wiper switch and replaced it as much to my supp rise it fixed the problems

Jul 26, 2009 | 2000 Ford Focus

1 Answer

Left rear turn signal, brake light and reverse not working


Did you ever figure this out? I've got the same exact problem with my tahoe.

Apr 11, 2009 | 1999 Chevrolet Tahoe

Not finding what you are looking for?
2005 Chrysler PT Cruiser Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...