Question about 1992 Dodge Ram 250

1 Answer

Removing speedometer 1992 dodge ram 250

Steps for removing speedometer from 1992 dodge ram 250 king cab turbo cummings diesel.

Posted by on

  • Anonymous Dec 31, 2008

    how do i make it work properly

  • birdbk Mar 13, 2009

    That

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I don't know if it's the same as my D150. But it's pretty simple:
1) remove about six screws from under the upper lip of the dash face bessal and one under the overhand above the radio.
2) carefully jimmy the bessal straight out. It has about four spring trim-clips that will release under pressure.
3) this exposes the speedometer instrument cluster. It is one big assembly (speedometer, fuel, temp and elctrical guages, etc) attahed with about six #2 phillips face screws. Remove these.
4) There are three back contections on the cluster: two electronic and one mechanical. Carefully start to pull the cluster out along the steering column until you see the shift indicator control line ( a small fishing-line with a hook on the end) attached to a small steel flang on the base of the steering column. This can be unhooked with your fingers or needle-nose pliers.
5) as you pull the cluster further out you can reach behind and unplug the two electronic connections. The round one simply pulls straight out. The last (rectangular) one has a pinch latch you need to compress to allow the plug to come out.
your finished!

Posted on Mar 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 1992 dodge ram power 250 cummins turbo diesel wont charge replaced alt and battery and still wont charge what can be my problem?


My 1992 Cummins W250 auto trans turned out to be the Computer/ECM mounted on front fender by battery tray. Mine only acted up in cold wheather. It started out with the ASD (auto shut down relay) clicking rapidly. In addition the water in fuel, wait to start and check engine light also blinked fast. In this state, the battery would not charge.

Sep 30, 2012 | 1992 Dodge Ram 250

1 Answer

Need instructions on how to replace water pump on 92 dodge ram 2500, 5.9 diesel turbo cummings


  1. Disconnect the negative battery cable.
  2. Drain the coolant.
  3. Use a 3 / 8 in. drive breaker bar to lift the belt tensioner and remove the belt.



0900c15280070771.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 12: Always install a new O-ring in the diesel water pump

  1. Remove the two water pump retaining bolts and remove the pump from the engine.
  2. Remove the O-ring from the pump groove.

To install:
  1. Clean the O-ring groove and install a new O-ring.
  2. Clean the pump mating surfaces and install the pump to the engine.
  3. Tighten the mounting bolts to 18 ft. lbs. (24 Nm). Fill the radiator with coolant.
  4. Install the drive belt.
  5. Connect the negative battery cable, run the vehicle until the thermostat opens, fill the radiator completely and check for leaks.
  6. Once the vehicle has cooled, recheck the coolant level.

Dec 24, 2010 | 2004 Dodge Ram 2500

1 Answer

I have a 92 dgd p/up cummings turbo diesel, trans lines are leaking. 1/2 lines. where can i get them


Go to your local auto parts store and get pre-made steel brake lines. They will do the trick. You need to know how long they are and the width. Also remove one end and look at the shape of the line end. There are 2 different designs, conventional which is concave and balloon. They can't interchange. If you need to use a metric wrench to loosen the nut, then the line also is metric. Pick up a cheap tubing bender to fit your new line. This will allow you to make sharp bends without collapsing the line. Hope this helps.

Jun 26, 2010 | 1992 Dodge Ram 250

1 Answer

1992 dodge ram d250 diesel speedometer is not working


1.Check your cable on the tranny
2.Replace speedo head cluster
3.Check your fuses

Apr 30, 2010 | 1992 Dodge Ram 250

1 Answer

How do you remove the flywheel when replacing the clutch


Take trans out, clutch out, and remove the flywheel bolts.

May 30, 2009 | 2007 Dodge Ram 3500 Quad Cab Laramie

1 Answer

Getting turbo off a 2001 dodge ram 2500 series to replace it


The tuff part is getting to the nuts that clamp the exhaust housing to the exhaust manifold. You may need to modify (heat up and bend) some wrenches to get them all off. Be sure to prime the new turbo before running it.

Apr 06, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

Need control arms for 1997 2500 RAM 4x4 Diesel


new: www.rockauto.com
used: www.car-parts.com

Dec 18, 2008 | 1999 Dodge Ram 2500 4WD

Not finding what you are looking for?
Cars & Trucks Logo

457 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

71043 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6981 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...