Question about 1987 Nissan Stanza

1 Answer

I need the number on the computer (ECU) nissan Stanza 87 SW, STD,FWD

Please, I need the ECU number , because I install a ECU (number 85 ) and my SW don`t work........ the SW is Mod. 1987 ,FWD, Nissan Stanza... Thanks in advance for your atention.......

Posted by on

  • jjvidglez Nov 08, 2008

    I aprreciiaate your quick answer ,, your information was helpful, now I will get the ECU proper to my SW.... thanks a lot.....

  • yadayada
    yadayada May 11, 2010

    The ECM/ECU number is unique to many things, there are lots of numbers for many applications, you will need to get the number off the old ECM and then you can get another rebuilt unit.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 373 Answers

Hi... On your question For ECM to 1987 Nissan Stanza..
Are 6 Available number .
2 are for vehicles 4WD. Incl. wagon. Calif emissions. 2261A-20R66RE,
with out calif, 2261A-20R06RE,

2 For vehicles FWD Wagons only. Calif emissions, 2261A-20R75RE,
With out Calif emissions, 2261A-20R15RE.

2 For vehicles Sedans FWD Exc Wagon. Calif emissions, 2261A-D5507RE,
With out calif emissions, 2261A-D4507RE,

NOTE , " RE" Mean Remanufactured ECM. Is not available new.

Ok.. Are the number I have Based on Mitchell ondemand, Repair Software.

I hope this info help on your question.
Any more questions let me know...

Posted on Nov 07, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 92 nissan stanza ex. Need to know the location of the diagnosis control unit is.

Oh boy, you are in for a learning curve. I spent the better part of a year getting to know the Nissan system of computer controls, diagnostic procedures, everything about Sentras from the mid eighties to the mid nineties. Your Stanza is very similar, fortunate for you to have a '92 with somewhat more sophisticated controls than my primitive '87 model. I even had to deal with a computer controlled carburetor-more headaches than I care to recall.

First, Jack, you have to find the computer, which is the diagnostic unit and the little LED light or lights on it are the blinkers that blink out the trouble codes. The computer on mine is under the passenger front seat. If not there, it will be behind the glove box or in the center console. So you locate it and set it in mode 4- for code read outs. That is the diagnostic mode. There are 5 modes, you can read the short paragraph about it in the link I will give. It's really easy, there are only 16 codes in all. Here is the link with all details and short description of codes.

Sep 23, 2015 | Nissan Cars & Trucks

1 Answer

Why my 1987 nissan stanza idles high in park?

Take the idle air control valve off and clean the carbon out of it with a non-chlronated brake ceaner then let dry 10 minutes and re-install.Reset the computer afterwards by disconnecting the ground cable on the battery for 30 seconds then re-install.

Jan 29, 2012 | 1987 Nissan Stanza

1 Answer

I have a std 5 speed nissan maxima SE 1998, and i change the ECU because when i got the car had the ECU from a automatic maxima so the check engine light it was on, because the car is std, so i change ...

Rear 02 is catalytic convertor here the thing 5 spped and automatic will not make a difference on the engine management it doenst manage transmission control it seperate in the ECM if you have the old one the prom is removable is you dont lets deal with what you got the rear or is a heated circuit so you need to check for 12 volts on the white wire and ground at the black if it all check out then you need to check the signal wire for activity if you get a lot of activivy you got a bad catalytic

Aug 20, 2011 | 1997 Nissan Maxima

1 Answer


Possibilities include blown fuse due to too much fan current draw, faulty wiring, faulty cooling fan relay, check the cooling fan relay in underhood fuse box. the contacts may be burnt and sticking.

Jul 07, 2011 | 1985 Nissan Stanza

1 Answer

Hi I have a Chrysler Grand Voyager LE 98 (S plate) there is an indicator fault and the relay has no diagram on it would you be able to explain how it supposed to work please. It appears that there is no...

No the ECU is the ground for the relays. There should be two positives and to grounds At the relay port. One positive is constant, the other comes on with the ignition. On the bottom of the relay there are numbers. 30, 85, 86, 87. 30 should be hot at all times, it supplies voltage to 85. 86 is hot when you turn on the ignition, 87 goes to the ECU. The ECU grounds out the relay to energise it, thus sending power to 85. This works the same for all the relays.

Feb 06, 2011 | Chrysler Voyager Cars & Trucks

1 Answer

Need to know how to retrieve the diagnostic codes on a 1989 nissan stanza

I have the 87 model,but the procedure should be the same. Its under the passengers seat. Had to remove my seat to access it.Turn the ignition on,with a flat-headed screwdriver turn the screw fully clockwise,and wait until you see several blinks. Two or three.Now turn the screw fully counter-clockwise,and read the blinks.The Red light denotes "!0), the yellow light denotes (1), so if the Red light blinks once,and the green light blinks twice, the code will be 12

May 20, 2010 | 1989 Nissan Stanza

1 Answer

Need info on replacing the front wheel bearings on my front wheel drive 1985 Nissan Stanza?

WOW...85? Go to AutoZone or Napa and order a Chiltons manual ($25)...
Good Luck getting parts

Jun 23, 2009 | 1985 Nissan Stanza

1 Answer

How do i replace fusible link on 87 nissan stanza

The fusible links on this car's battery terminal are actually plugged in to the battery terminal, red-wire and green wires. Good Luck get back to me if you need more assistance

Dec 15, 2008 | 1987 Nissan Stanza

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

77499 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides