- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Belts squeak for the same reason tires do when they spin. They are slipping. Something isn't turning as fast as the belt wants it to. On ford it's usually ether the idler sprocket or the tensioner. If you remove the belt and try spinning all of the pulleys by hand.( note the crank wont spin freely) you will usually be able to tell witch ones slipping.
this is caused by a defective wheel bearing, they can get really loud, any front end shop will road test this foree and give you an estimate to repair, I urge you to have this checked ASAP as uit can cause the wheel to break off the hub if the bearing freezes up.
use a 15mm box wrench on the nut retaining the tensioner pulley to pry the tensioner 'arm' against the spring to release belt. note belt routing on decal under hood,or make a sketch,to aid in replacement.
on OHV engine rotate clockwise
on OHC rotate counter clockwise
be sure belt is completely seated on pulleys