Question about Chrysler Voyager

2 Answers

I have a 1997 3.3 crysler grand voyagar, when i drive the engine just cuts out. to restart it i have lock the car and them unlock it then it will start again. Its only happened 3 times in 2 days. what could this be? king regards ben james

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It happened to me i had a fault under the dash it was something with the wireing take it your local garage it cost me 80 quid but it hasn't happened since

Posted on Nov 16, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 275 Answers

The anti theft is kicking on for some reason check the fuses, if the fuses are good then you will probably have to take it to a dealer and have them look at the anti theft

Posted on Nov 07, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Engine shook violently and cut off wont restart and when it does shakes and then cuts off

You need to take it to a qualified repair shop an have it diagnosed . Sounds like you need a new engine .

Dec 23, 2017 | Cars & Trucks

1 Answer

1997 plymoth cuts off while driving, if i sit for some time it will restart and it wont happen again. most time it does. i have also noticed a dragging in tha gas pedal when i go over 40 mph. i have taken...

I would check the fuel pressure first it should be 49 psi.Also if you have another ignition key try using it awhile and see if the problem still exist.The ignition key lock cylinder could be worn out causing this problem.

Nov 01, 2011 | 1997 Plymouth Grand Voyager

1 Answer

Engine locked up wondering if there are any defects known for a jeep grand cherokee laredo 2000 4.0l engine. Wondering if debris buildup at #3 cylinder location could cause this to happen? if not what?...

you can check the crysler website for any recall
debris on the outside of the cyl. won't do it but
before you sign the death certificate you can
try turning the engine back + forth with 1/2" or
3/4" drive socket + breaker bar and try to see
or hear where it has bound up also remove the
belt I've seen frozen a/c compreser or ps pump
give the same symtems hope this helps
good luck

Jan 15, 2010 | 2000 Jeep Grand Cherokee

1 Answer

1997 pontiac grand am coolant fan not coming on when it needs to. Put new relay on as well. fan does work. what to do next?sometimes it will be on and also stay on but when car cuts off and go to cut back...

coolant fan should kick on when engine coolant reaches 190 to 200 degrees.the coolant temperature sensor resistance will drop.closing contacts allow the pcm to signal or turn on coolant fan.if coolant temoerature sensor is open or bad the coolant fan will not turn on.need to replace it.

Jan 01, 2010 | 1997 Pontiac Grand Am

2 Answers

My 1997 Jeep Grand Cherokee cuts off while I'm driving.

If you have zero oil pressure thats a BAD sign, first have a mechanic check what the engines actual oil pressures are.

Oct 31, 2009 | 1997 Jeep Grand Cherokee

1 Answer

1997 pontiac grand prix gtp superchareged...freaked out

do you have any thing extra hooked up to your battery because i have a 96 and my amp kills the car when im sitting still abs light cuts on then i lose power for a few seconds

Feb 05, 2009 | 1997 Pontiac Grand Prix

1 Answer

Lock up converter shudder ? when I apply reverse and 1st

If you can find the lead that operates the lockup solenoid in the transmission, you could cut it, but I would not recommend that. Likely the converter has an internal failure. Further operation can cause more fine metal (from broken part) contamination to circulate into transmission and damage can be costly!!!

Dec 17, 2008 | 1997 Jeep Cherokee Country

1 Answer

97 Buick Century - Quit running

Its sound like a Crank sensor to me. Good Luck

Dec 12, 2008 | 1997 Buick Century

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides