Question about 1998 Mazda B-Series

1 Answer

Need Mazda 1998 B2500 4cyl 5sp throw out bearing assembly & dustcap diagram


Posted by on

  • vikiki Nov 07, 2008

    Thank you but basically I need he diagram...



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 37 Answers

The thow out bearing is part of the slave cylinder assembly. Autozone carries 2 of these part numbers (12596) for $47.99 and (LSC003) for $84.99. Don't foget to change the pilot bushing also. It's $3.99. It's located in the back of the crankshaft. The input shaft from the tranny rides in it. Let me know if you need any help with changing it or bleeding out the slave cylinder. Thanks, Len

Posted on Nov 07, 2008



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

03dodge 1500 5 speed piolet bearing failed come apart tore up clutch disk what happen

You experienced a bearing failure, do you mean the pilot bearing or the throw out bearing. Very odd to have pilot bearing go, unless very high mileage and was not changed when clutch was done.
Dodge diesel truck forums talk of problems with pilot bearings, not so much about Dodge gas.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Does my 04 Ram 1500 3 7L 5sp have pilot bearing sleeve DodgeForum com

May 02, 2016 | Cars & Trucks

1 Answer

1998 Mazda 626 clutch whining/grinding won't shift gears

Need to replace clutch kit will repair clutch problem and throw out bearing

Feb 11, 2014 | 1997 Mazda 626

1 Answer

How to adust clutch...

You don't say if it's slipping or not. You have a hydraulic clutch which consists of a master cylinder and a slave cylinder. If it's slipping, you will probably need to replace the clutch assembly (clutch disc, pressure plate, throw out bearing and pilot bearing). Be sure the master cylinder (plastic reservoir very near brake booster) for fluid level. If low, fill to line. If empty, you might have air in the system. Not sure on your vehicle, but sometimes you can adjust the rod that pushes your clutch fork with the slave cylinder (this will be under the truck in front of your transmission) It is not recommended, but if you need to get it to a repair shop without a tow truck, it's worth a look.

Sep 22, 2011 | 1998 Mazda Pickup

1 Answer

I have a 98 Ford Ranger and need to replace the rotors on front. It is a 4 X 4 and has that stanger cap on it instead of just a dustcap.

You will have to take the auto locking hub cap off and then remove the axle nut, and the wheel bearing to get the wheel assembly off, then you will take the bolts out of the wheel assembly that are used to hold it to the rotor.

Mar 24, 2011 | Ford Ranger Cars & Trucks

1 Answer

I need a diagram of the front wheel bearing assembly. I need to know how to remove the right front wheel bearing and remove - reinstall the center "geared insert" in the bearing without damaging...

These are pressed in. You have to press the hub out first(center part), then there is a C clip that has to be removed to press the bearing out. If you don't have a 20 ton press take it to a shop. Costs about$30.00

Feb 13, 2011 | 1998 Mazda 626

1 Answer

How do I replace the front wheel bearings on a Mazda 626 1998

The front bearings on a mazda 626 are sealed and you must remove the entire hub assembly to have a shop or dealer install the bearings. The hardest part is you need to remove the center axel nut and it is very tight and is called a stake nut. If you do not have a fairly good amout of skill at repairs, this is one job that is safest left to the pros. Just one missed step can create more damage than you could beleive.

May 20, 2009 | 1998 Mazda 626

1 Answer

Clutch makes a squealing noise

The throw out bearing is going oout. The reason you hear the squeal when you push in the clutch is that is when the throw out bearing spins up. Rest of the time it does not spin.It is irratating, You should replace the entire clutch assembly when you replace the throw out bearing. Hope this helps, rate me high.
RPM Northwest

Feb 02, 2009 | 1998 Dodge Dakota

1 Answer

Throw out bearing

the throw out bearing should pull off and slide the new one on.feel free to contack me any time .i know these truck inside and out i owen a 92 mazda 2600i 4x4 ok good luck . mbill223

Nov 29, 2008 | 1998 Mazda Pickup

1 Answer

Diagram Mazda 1998 B2500 4cyl 5sp throw out bearing assembly & dustcap

Are you asking where the throw out bearing is located?
If so, removal of your transmission is necessary to access it. It will be on your input shaft of your tranny behind your clutch. Its on the other side of your clutch fork.

Nov 07, 2008 | 1998 Mazda Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

77947 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8832 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides