Question about 2005 Dodge Neon

1 Answer

2005 dodge crankshaft sensor

I have replaced the sensor 3 times and same problem comes back after driving about 200 miles. The engine light comes on and the engine bogs down. Someting is causing the sensor to go bad?

Posted by on

  • 5 more comments 
  • Anonymous Nov 22, 2008

    mine does same thing, always at 2200 rpm. replaced the camshaft sensor and runs great now.

  • ggrgry Dec 01, 2008

    I have a problem that may be simler, check eng lite on it starts with one code and then end up with random miss fire

  • Anonymous Jan 06, 2009

    yes, I do have the same problem.

  • lilliesan Feb 28, 2009

    2005 Dodge Neon SXT, had it for 3 years, bought brand new.

    After shopping at a nearby store for about an hour, car cranked fine, but jerked out of parking space. Stopped after about 10 seconds. Drove about 100 feet, stopped at red light. When light turned green, it jerked again. Felt like it couldn't get the gas right.

    Went about a mile and stopped at fix-it shop. Diagnostic said crankshaft sensor and O2 sensor. Got it replaced next day. Drove 2 miles there and 2 miles back. That night, drove 1.5 miles and the engine light came on again.

    What problems can this cause? Will driving it damage the engine?

  • Chris
    Chris Apr 09, 2009

    i have same problem with '05 neon but keeps happening every time i put new sensor in. What could this be??

  • hummor Apr 26, 2009

    Replaced cam, crank and computer... the only thing left is the wiring harness but the dealership wants $1,700 for that! Let me know if you find out something.

  • hummor Apr 26, 2009

    Replaced cam, crank and computer... the only thing left is the wiring harness but the dealership wants $1,700 for that! Let me know if you find out something.


1 Answer

Buy a new car or try the camshaft position sensor

Posted on Nov 08, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Diag code P0339

P0339 is Crankshaft Position Sensor A CKT Intermittent
P0335 is Crankshaft Position Sensor A CKT Malfunction

Feb 27, 2012 | 2005 Dodge Ram 1500

1 Answer

I have a 2005 Dodge neon with 157K miles just had the orignal timing belt replaced. When I start the car and the rpms hit about 3400 the car starts cutting out. Now I get the check engine light and when I...

Check your vacuum lines, it sounds like one did not get reconnected correctly. When this happens you check engine to come on and will cause your engine's rpm's to rise.

Apr 08, 2011 | 2005 Dodge Neon

1 Answer

I'm getting the engine light coming every so often. It seems that after I fill the tank and get down around 3/4 tank, The message I'm getting is "EVAP Emission Control System Purge Flow Fault". PO441 and...

I have a 2004 dodge stratus 2.4 dual overhead cam. When driving down the road, bell goes off, check engine light comes on, and it's like I'm driving on limp mode, when going over 2000 rpm's, there's a severe stutter. After getting code for light it points to cam shaft sensor, which i changed. I also changed crank shaft sensor. After all of this was done, drove great for about 30 miles and the same thing happened all over again. If anyone can point me in the right direction it would be greatly appreciated.

Jul 05, 2009 | 2004 Dodge Stratus

1 Answer

2003 Dodge Neon: P0016 (already replaced sensors, belt, tensioner

the computer may need to be reflashed. if it is running then it is not a bad sensor. either of those being bad would cause it not to run.

Jun 20, 2009 | 2003 Dodge Neon

1 Answer

Cam sensor causing other probelems

the cam sensor definitly can cause the problem. pull the trouble code and make sure the check engine light is for the cam sensor. if so, replace it and retest

May 11, 2009 | 2005 Dodge Neon

1 Answer

Engine light comes on 2003 Jeep grand cherokee laredo

Check the Fuel Pump Relay, it may be malfunctioning and need replaced. Also, in some vechicles, if the batter is disconnected and reconnected, the service engine light will come on from time to time, going off and on simultaneously. Have a diagnostics done to see if any codes show up. If no codes appear, then have them all cleared and drive for another 200 miles. Sometimes the computer will need to be cleared a couple times before the light will stay off. Make sure that all fuses and relays are good, and securey in place. Check all factory installed lights to make sure they are good, and securly in place as well.

Mar 31, 2009 | 2003 Jeep Grand Cherokee

1 Answer

2005 jeep grand 5.7 hemi p0406 code

egr valve located on front of motor on passenger side mounted to cylinder head below valve cover

Jan 04, 2009 | 2001 Dodge Grand Caravan

Not finding what you are looking for?
2005 Dodge Neon Logo

2,305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

71288 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7009 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides