Question about 2002 Ford E350

2 Answers

Brake repaire kit

I have ford E350 type ecoline 1989 ,my problem is i can't find spare parts for my Motorhome in my contry , is there any alternative parts i can use instead of such as GMC , DODGE ...ets ?
which modle can i buy ?

i feel Disparates of finding most parts that i need
kindlly please E_Mail the info to

majlis2000@hotmail.com

Posted by on

2 Answers

Thanks alot

Posted on Nov 06, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 566 Answers

Hi from uk i can give you telephone number of a company here in england this company deal only in international brakes components for cars trucks etc the company is called BRAKES INTERNATIONAL locations at various counties and provide delivery /postage service they will be able to help you locating or hopefully supply the parts you seek telephone ENGLAND O1706 666999 this is the local company that i use well worth giving them a call? be sure you have details of make/model of your vehicle also year ? hope this helps you

Posted on Nov 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to put in a brake booster and master cylinder on a 1989 ford motorhome


Really no different than on small cars unless you have Air brakes. Before doing this, test booster for leaks by spraying water mist on brake booster with engine running.

Engine will run differently or stall if booster draws in water mist. Try suction to remove brake fluid from Master as you will smell brake fluid that you spill or open brake line and let fluid out on both front and rear wheel. You may not need a different brake booster.

Money can be saved by repairing yourself, but what I suggest is bad brake work can cause an accident. Other repairs may not have that potential. At least watch a Video through an internet search, get a HELP CD from an Autoparts store or watch someone in person first.

You will need some quality FLARE wrenches to keep from rounding off the tubing fittings.

Apr 05, 2015 | 1989 Ford F 350

1 Answer

Location of flasher on a 2006 ford e350 ecoline wheelchair van


Most flasher units are located in the fuse block, but not absolutely sure on your model.

Mar 29, 2014 | 2003 Ford Crown Victoria

1 Answer

1989 Ford Ecoline 150 van new fuel pump new filter but still won't get gas and start


The in-tank fuel pump may not be working however I would check and make sure you have power to the pump before just replacing it.Iyou don't have power at the pump then check the inertia switch and if that's doesn't have power check to see if the fuel pump relay is powering up the pump and repair as needed

Jul 29, 2010 | 1989 Ford Econoline

2 Answers

Wear is air conditioing freon line on motorhome


right in middle of engine just in front of firewall, it is pointing down. 1989 e350 RV, you can see it from left side of engine looking towards middle of firewall. BAD location!!!!

May 26, 2010 | 1989 Ford Econoline

1 Answer

Abs rear light stays on


The sensor is located I believe on the differential housing,could be faulty or corroded

Jul 10, 2009 | 1993 Ford Econoline

1 Answer

Help-Ford E-350 Brake problem


First, if the recall applies to your van, it can be done anytime. There is no time limit on recalls. Call your dealer with your 17 Digit VIN number and they can check. Please rate as solved if this is what you need. thanks.

Here is the recall:

Safety Recall 92S44 - Certain 1988-1991 F250/350 Trucks for Loss of Front Brake Effectiveness
Affected Vehicles
Certain 1988-1991 F250/350 trucks over 8500 lb GVW with 7.5L EFI or 7.3L diesel (4x2 and 4x4) and 5.8L EFI (4x4 only). Trucks under 8500 lb GVW. 5.8L EFI (4x2) and F-Super Duty light trucks are not involved in this recall. Specific vehicle information is as follows:

AFFECTED VEHICLES ASSEMBLY PLANT PRODUCTION DATES F250/350 Norfolk Job#1 1988 to 4/18/91 Kansas City Job#1 1988 to 4/25/91 Ont. Truck Job#1 1988 to 5/1/91 Mich. Truck Job#1 1988 to 5/11/91 Twin Cities Job#1 1988 to 5/29/91
Reasons For Recall
In certain extremely severe driving conditions, the vehicle may experience a loss of front brake effectiveness due to overheating of brake fluid. These vehicles have a split brake system and the rear brakes remain operational. This condition has been reported primarily in vehicles operated in mountainous regions, and on vehicles that have been in service for a minimum of one to two years and where the brake fluid has absorbed moisture from the air, lowering its boiling point. It usually involves heavily loaded vehicles driving on long, steep grades, or when towing at, or near, the Maximum Gross Combination Weight Rating (GCWR) for towing. Warm weather also appears to contribute to this condition. To correct this condition, dealers will install insulators in the front brake caliper pistons on all the affected trucks. 7.5L EFI engine equipped trucks will also have insulation installed on selected portions of the front brake lines.
-----------------------------------------------------------------------------------------
PART NUMBER DESCRIPTION CLASS DEALER PRICE F2TZ-2C361-A Kit-Brake Caliper Piston Insulator (All Except 7.5L Engines) BG F2TZ-2C361-B Kit-Brake Tube Insulator Jacket (Required Only For Vehicles Equipped With 7.5L EFI Engines) Kit Also Includes Brake Caliper Piston Insulators

Brake Caliper Piston Insulator Kit
Installation Instructions
  1. Remove the front wheel and tire assemblies.
  2. Remove the brake calipers from the rotors. Refer to the appropriate shop manual for the procedures.
  3. Remove the inner and outer brake linings.
  4. Inspect the brake caliper pistons. If the pistons are phenolic, (brown in color) no modifications are required. Reassemble the calipers as described in the shop manual. If the truck is equipped with a 7.5L EFI engine, install the brake tube insulator kit. If the truck is not equipped with an 7.5L EFI engine, install the wheels and tires and release the truck.
    If the pistons are aluminum, continue as described below.
  5. Remove the steel retainer and Nomex thermal washers from the kit.
  6. Place a steel retainer on a bench with the tabs facing up. Refer to Figure 1.
  7. Place a Nomex thermal washer over the tabs so that it rests on the barb of each tab. Then, carefully press it over the barb of one of the tabs. Repeat the procedure for each of the remaining tabs.

    • NOTE:
      Do not bend the tabs. The inner edge of the washer may crease slightly as it passes over the barb. This is permissible provided that the crease can be smoothed out once the washer is in place. The washer must be installed without tearing.

  8. Push the washer down onto the back face of the retainer. Be sure it is seated uniformly on the retainer. Once installed, do not use an adhesive or other aid to hold it in place. This is neither necessary nor permissible.
  9. Snap an assembled insulator into the inside diameter of each caliper piston. Be sure the assembly is firmly seated on the rim of the piston. See Figure 2.
  10. Install the inner and outer brake linings.
  11. Clean the caliper slide surfaces on the caliper and the spindle with a wire brush and lubricate with Disc Brake Caliper Slide Grease, D7AZ-19590-A (ESA-M1C172-A) or equivalent.
  12. Reinstall the brake calipers. Refer to the appropriate shop manual for the procedures.
  13. Install the wheel and tire assemblies.

May 25, 2009 | 2007 Ford E-350 Super Duty Length XLT

1 Answer

No rear turn signals and brake lights.


Check that you have got an earth at both rear light clusters.

May 23, 2009 | 2002 Ford E350

Not finding what you are looking for?
2002 Ford E350 Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...