Question about 1979 Pontiac Firebird
My head lights and tail lights just stop working i replaced all the bulbs and now im stuck
Check the ground wire. You can get more info on firebirds at transamcounty.com
Posted on Jan 04, 2009
Replace the headlight switch and make sure the connector is not melted or otherwise burned.
Posted on Dec 01, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 17, 2015 | Cars & Trucks
Mar 31, 2012 | 1994 Pontiac Firebird
process for replacing tail light bulbs is the same in all models. If
you have a burnt-out tail light bulb, you may need to replace the
brake light, the reverse light or the turn signal. The procedure to
replace each of the bulbs is the same.
1. Open the Hummer's rear swing gate. This will expose the edge of the vehicle's tail light assembly. You'll see two small Phillips head screws that hold the tail light assembly in place. Put on your gloves.
Remove the two screws from the tail light assembly. Pull the tail
light out and inspect the back for two bulbs. The top bulb is the
brake light and turn signal. The bottom bulb is the reverse bulb.
Determine which bulb you need to replace.
the tail light into its cradle. Hold it with one hand and replace
the Phillips head screws with the other.
Dec 03, 2010 | 2008 Hummer H3
Jan 11, 2010 | 2002 Jaguar X-Type
Dec 26, 2009 | 1997 Land Rover Discovery
Jun 17, 2009 | 2000 Pontiac Firebird
Jun 01, 2009 | 2006 Ford Focus
Mar 15, 2009 | 2004 Chrysler PT Cruiser
Aug 10, 2008 | 2000 Pontiac Firebird
175 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: