Question about 1995 Toyota 4Runner

1 Answer

'94 4runner 4dr. Inop. r/rear window & rt. frt. window will go down not up.

Checked and changed actual r/rear switch with proven good switch. Did the same with the master switch. I can jump and run a hot wire to both motors and both go up and down. Changed the door control module behind the lt. kick panel with proven module and no difference. I believe the problem to be a bad ground, but not sure. Help!!!!

Posted by on

  • Toyota Ed May 11, 2010

    Please clarify the failures and the steps taken. I assume that the RF and the RR window motors are inoperative, yes? Have you changed the LF switch with a known good one? Please respond.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

There is a saftey built into the tailgate that will interupt the ground to the switch in the center console with the tailgate open. This keeps the operator from trying to roll the window up with the tailgate open. If you have no ground to the rear window switch it is most likely the tailgate safety switch. If it is like my '88 it is built into the drvers side tailgate latch.

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both front power windows don't work. Front switches on the drivers & passenger door are not backlit, but the rear two are.


Check the Black with Violet stripped wire to the master switch for a good ground. Hook a volt meter to battery ground and the other probe to the ground pin at the master switch black ground wire pin in the connector while operating switch. Post results.

Apr 15, 2016 | 2012 Ford Fiesta S 4dr Hatchback 1.6L...

1 Answer

Is there a fuse for the window switch


Which window switch ? RT DOOR CB-circuit breaker , do you know what a circuit breaker is ? 25A (System power for right rear window)
LT DOOR CB 25A (System power for left rear window
The power window system will operate anytime the retained accessory power (RAP) system is active or when the ignition switch is in the ACCY or ON position.
The DDM contains 4 power window switches which are integral components. Closing any of the normally open, rocker type switches provides the DDM with a request for power window operation. The switches for the 2 front windows have 3 positions Up, Down and Express Down, while the switches for the rear windows have only 2 positions, Up and Down. Each of these switches and their positions is a direct input into the DDM. Upon receiving a request for power window operation, the DDM, transmits a class 2 message indicating the switch and it's changed position.
The PDM contains a single power window switch that is an integral component. Closing of this normally open, rocker switch provides the PDM with a request for the front passenger power window operation. The switch for the front passenger window has 2 positions Up and Down. Each of these switch positions is a direct input to the PDM.
The 2 rear passenger doors have there own switches. Each of the switches contain a power window up and down relay. A switch activation alone can control the up and down functions of the rear windows. However the BCM, upon receiving a class 2 message from the DDM, can control the set of relays which will activate the rear window motors.


The power window system consists of the following components:
?€¢
Driver door module (DDM)


?€¢
Passenger door module (PDM)


?€¢
Body control module (BCM)


?€¢
LR power window switch


?€¢
RR power window switch


?€¢
Window up and window down relays in each of the rear passenger window switches


?€¢
Window lockout switch


?€¢
Reversible power window motors in each of the doors (circuit breaker protected)


?€¢
LT DOOR CB 25A (System power for left rear window)


?€¢
RT DOOR CB 25A (System power for right rear window)


If you not sure about any of this I suggest you take your vehicle to a ASE certified repair shop .

Oct 08, 2015 | 2002 Chevrolet TrailBlazer

1 Answer

Diagram Power Window


What year,make and model is this and also how do you know the window motors are good?

Jun 09, 2013 | Cars & Trucks

1 Answer

Rear brake line was removed and now i need to bleed the system 1997 chevy blazer any special tools needed ?


you need a 1/4 or 5/16" wrench and procedure requires bleeding all corners staring with furthest away from master cylinder working your way closer (Rt Rr, Lt Rr, Rt Frt, Lt Frt)

Mar 02, 2011 | 1997 Chevrolet Blazer

1 Answer

Radio fuse


# 18 for radio and it is a 20amp...see below for all #'s got to and amps... 1-20amp-pwr outlet frt. 2-10amp-rear fog lights(export only)
3-15 amp-horn 4-10amp-hedlt low beam rt
5-10amp-hedlt low beam lft 6-20amp-bodycontrolmodule/pwr dr locks 7-spare 8-spare 9-10amp- rt pk lt /rt tail lt/trailer tow lt/cluster
10-spare 11-15 amp-flasher 12-15 amp-stop lts
13-10amp-bodycontrolmodule/cmtc/cluster 14-spare
15-10amp-pdc fuel pmp & auto shutdownrelays/skis
16-20amp-pwr outlet rear 17-15amp-rear wiper 18-20amp-radio choke relay 19-20amp-frt fog lts/trailer tow stop and turn lts
20-20amp-sunroof 21-spare 22-10amp-wiperswitch/frt and rear washer 23-10amp-lft park lt/lft tail lt 24-10amp-pdc blower motor relay 25-10amp-heatseatswitch/hvac controlhead/trailor tow battery charge 26-10amp-hedlt highbeam rt 27-10amp-hedlt highbeam lft
28-spare 29-15amp-heated seat module 30-10amp-heated mirrors/rearwindowdefrosterindicator 31-20amp-cigarlighter
32-10amp-radio/frtdoorlockswitches/bodycontrolmodule
33-10amp-skis/diagnostic connector 34-15amp-cluster/courtesy lts/radio/bodycontrolmodule/maplights/cmtc/underhood lt/vanity lts
35-spare 36-10amp-ignition run/start-orc/lft and rt siacm
37-10amp-ignition run only-orc 38-10amp-abs module/brake shift interlock solenoid 39-10amp-rear window defroster relay/flasher/backup lts

Jul 29, 2009 | 2002 Jeep Liberty

5 Answers

2002 jeep liberty interior fuse diagram


1-20amp-pwr outlet frt. 2-10amp-rear fog lights(export only)
3-15 amp-horn 4-10amp-hedlt low beam rt
5-10amp-hedlt low beam lft 6-20amp-bodycontrolmodule/pwr dr locks 7-spare 8-spare 9-10amp- rt pk lt /rt tail lt/trailer tow lt/cluster
10-spare 11-15 amp-flasher 12-15 amp-stop lts
13-10amp-bodycontrolmodule/cmtc/cluster 14-spare
15-10amp-pdc fuel pmp & auto shutdownrelays/skis
16-20amp-pwr outlet rear 17-15amp-rear wiper 18-20amp-radio choke relay 19-20amp-frt fog lts/trailer tow stop and turn lts
20-20amp-sunroof 21-spare 22-10amp-wiperswitch/frt and rear washer 23-10amp-lft park lt/lft tail lt 24-10amp-pdc blower motor relay 25-10amp-heatseatswitch/hvac controlhead/trailor tow battery charge 26-10amp-hedlt highbeam rt 27-10amp-hedlt highbeam lft
28-spare 29-15amp-heated seat module 30-10amp-heated mirrors/rearwindowdefrosterindicator 31-20amp-cigarlighter
32-10amp-radio/frtdoorlockswitches/bodycontrolmodule
33-10amp-skis/diagnostic connector 34-15amp-cluster/courtesy lts/radio/bodycontrolmodule/maplights/cmtc/underhood lt/vanity lts
35-spare 36-10amp-ignition run/start-orc/lft and rt siacm
37-10amp-ignition run only-orc 38-10amp-abs module/brake shift interlock solenoid 39-10amp-rear window defroster relay/flasher/backup lts

Jul 03, 2009 | 2002 Jeep Liberty

2 Answers

I don't have an owners manual and I need a fuse diagram for my 2002 jeep liberty


There is normally a diagram printed onto the the inside of the fuse case.

May 24, 2009 | 2002 Jeep Liberty

4 Answers

Rt rear turn & brake lights inop


Due to poor design on Fords part. When you use the tilt often, the wires inside due not have enough relief. They are to tight. My 02 sport track had same problem. Wire actually broke off inside the steering column. Take off the lower then upper plastic around column. You probably have broken or loose wires

Feb 03, 2009 | 2001 Ford Explorer Sport

1 Answer

Rear brake lights inop...3rd brake light works fine...


Switch module in steering column will need to be replaced or the brake switch itself at the pedal. There was actually a recall for the pedal switch that came out in early 02 Usually the switch in the column about $125.00 at the aftermarket parts stores

Nov 25, 2008 | 2001 Oldsmobile Bravada

Not finding what you are looking for?
1995 Toyota 4Runner Logo

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...