How to replace clutch on 2001 tiburon

Question edited for clarity, add maker and correct order.

Clutch Replacement Without Removing Sub-Frame

Hyundai Tiburon Forums https://www.newtiburon.com > ... > Transmissions Jan 22, 2021 - Briansmobile1 on YT put out a video detailing how to do a clutch job without dropping the whole subframe on a Sonata. Our subframe is supposedly ...

Clutch Install ' Hyundai Tiburon Forums
May 16, 2010
How much to replace clutch? - Hyundai Tiburon Forums
Apr 1, 2008
Installed clutch without dropping subframe
Feb 11, 2007
How long should a clutch repair take? - Hyundai Tiburon Forums
Nov 26, 2012
More results from www.newtiburon.com
..

clutch

you haven\'t refitted the gear change cables properly

If it's a standard transmission, this could be possible.Another way you can try is roll the car up to speed and throw in in gear and see if starts.The ignition must be on

go on the web and look for Hyundai coupe,there are loads of manuals available.......tiberon only in Korea and USA

does the car have 100,000 miles? is the clutch pedal have a high release?the shift cables could be binding ,i've only replace 1 in 4yrs and that guy was drag racing the car..i don't know what gummy means, but you could also have a syncronizer worn out in sixth gear. did you look at the old gear oil for brass or metal?

clutch is out or slave cylinder

Hi

If your clutch is slipping the clutch plate is worn out and will have to be changed. This involves engine and gearbox has to be taken out - then the gearbox has to be sperated from the engine to remove the clutch assembly and replace the clutch plate with a new one.

There is no adjustment on this clutch as it is hydraulic and therefore is self adjusting.

Hope this helps. Please remember to rate my answer. Thanks.

There are several sources from which to get your owner's and service manuals, including going to the manufacturer of the car, and these:

http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Vehicle_Car_Zone_Cars_Trucks_Vans_Owners_Manual_Lost_Need_Replacement.htm

Yes autozone.com has a repair guide for your car,you will be able to get the steering knuckle off,this is where the bearing is but ir requires a press or an equivlant to remove and replace the bearing.