Question about 1994 Ford Explorer Limited

Open Question

1994 ford explorer 4 wheel drive

What do u mean itis the same problem?

Posted by on

5 Suggested Answers

  • 99 Answers

SOURCE: 1994 ford explorer 4 wheel drive not working

Go to the engine compartment where the relays are located with the fuses. Check or replace the 4 wheel auto engage relay , maybe is not working. Is very clearly mark, I believe is the top right one looking at the bost front front of vehicle to the back. There is a diagram drawing of each relay in the cover, so you can't go wrong.

Posted on Nov 05, 2008

mattman2112
  • 57 Answers

SOURCE: Ford explorer stuck in low 4wheel drive

put it back into 2 wheel drive, then reverse 10 or 15 feet, this should unlock the hubs.

Posted on Jan 10, 2009

cbcs2008
  • 46 Answers

SOURCE: 2001 ford explorer sport trac 4 wheel drive wont work

Start the car
put in " N"
turn the 4X4 switch on
Then put in gear..
What do you see now?
Do the same in reverse when you take out of 4X4

Posted on Jan 19, 2009

  • 1 Answer

SOURCE: 1994 ford explorer 4 wheel drive not working

i can't open driver door on my 94 ford explorer from the outside

Posted on Mar 23, 2009

scott586
  • 41 Answers

SOURCE: How to remove disc brake rotor on a 1992 Ford Explorer 4-wheel drive

It should just pull off once you have taken the caliper off. It may be seized in place, if thats the case try spraying the back of it with some sort of penetrating oil, let it sit for a bit. THen put some heat on it if you have torches, or beat it with a hammer. Sounds kind of crude...but it works

Posted on May 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My low 4wd light will not turn off and my car is driving rough.What does this mean?


it means your stuck in 4 wheel low, or have the 4 wheel drive turned on and dont realize it. could possibly be a bad 4wd shift motor

Nov 28, 2011 | 2001 Ford Explorer Sport

1 Answer

Does my 2003 ford explorer sport have front wheel drive, rear wheel drive or all wheel drive. my email is kmmock1@gmail.com


it is most likely an automatic awd, 4 hi is full time 4 wheel drive, 4 lo is full time 4 wheel drive but at a very low gear ratio and should not exceed 25 mph or could cause damage. and DO NOT shift into 4 lo while vehicle is in motion. Auto is a 2 wheel drive but automatically engages into 4 wheel drive under heavy acceleration.

Jan 30, 2011 | 2003 Ford Explorer Sport

1 Answer

Im in the rocess of puting new brake pads and rotors on a 1994 ford explorer 4 wheel drive and cant get the old rotors off can you tell me an easy way to get them off?


Sometimes this would require a little "elbow greese"lol. If you have correctly taken everything off then try spraying some penatrating lube on the studs, front,and back of the rotor.

Sep 22, 2010 | 1994 Ford Explorer Limited

1 Answer

Does not activate 4x4


most common problem with the explorers and rangers is the 4 wheel drive motor on the transfer case. check in the left rear side compt for a reset button for the 4x4 first

Jan 02, 2010 | 1994 Ford Explorer Limited

1 Answer

97 Explorer auto 4 wheel drive


check if your ABS system is having isues. This is were the 4WD system gets the input to go into 4 Wheel Drive.

Jan 11, 2009 | 1997 Ford Explorer AWD

2 Answers

1994 ford explorer 4 wheel drive not working


I miss spoke...What had happen was that my front end was turning but hubs were not engaging...finally figured out automatic hubs were bad... when my ex had it she had a bearing repacking done, but they also put grease in hub.. wore down parts.. hope that helps..

Nov 05, 2008 | 1994 Ford Explorer Limited

1 Answer

1994 ford explorer 4 wheel drive not working


Go to the engine compartment where the relays are located with the fuses. Check or replace the 4 wheel auto engage relay , maybe is not working. Is very clearly mark, I believe is the top right one looking at the bost front front of vehicle to the back. There is a diagram drawing of each relay in the cover, so you can't go wrong.

Oct 26, 2008 | 1994 Ford Explorer Limited

1 Answer

93 ford explorer xlt


First check your 4 wheel drive switch to make sure it works, for on an off settings. (Use a volt-ohm meter for this. On should show continuity in the readings (if digital then it should show zeros in the dial) Off should show no continuity or 1.0 in the dial.

1. Check your fuses.
2, IF OK, then check your FUSE LINKS.
3. IF OK, then check your 4 Wheel Drive relay in the fuse box.
4. IF OK, then check continuity of the wires harness to the 4 wheel drive switch for DC voltage.

Jul 26, 2008 | 1994 Ford Explorer Limited

Not finding what you are looking for?
1994 Ford Explorer Limited Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...