Question about Subaru Forester

2 Answers

My transmition clutch went flat and can not put the car in any gear

Posted by on

  • nmie Nov 05, 2008

    I have subaru forester 2000. For longer period the cluthc for shifting the gears was hard. I was explained that thats how it should be , but yestarday the clutch went flat and the car would not go in any gear.

  • yadayada
    yadayada May 11, 2010

    What is a transmition clutch ??

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 51 Answers

Http://www.callharry.co.uk/General%20advice/How%20the%20clutch%20works.htm
sounds to me that you need to have your clutch changed above is a link I have found that tells how a clutch works

Posted on Nov 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Subaru Master
  • 70,347 Answers

I am still not sure what you are talking about, but do you mean the clutch pedal went to the floor? if so you will need a new hydraulic clutch master cylinder.

Posted on Nov 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost forward gears


You have lost the 1st, 2nd, etc. in DRIVE? If you put the car in SECOND does it move forward a little bit? Put the car in Manual 2nd, can you shift into DRIVE and feel the third gear? This happened to me. The 'forward clutch' needs replacing. The transmission clutch plates in that part are glazed over because the fluid is burned. See if your fluid is brown.

Mar 11, 2014 | 2001 Mazda Tribute

1 Answer

My 99 Cougars manual transmission will not go into any gears at all


Check the cable under the gear lever. Look for broken pin or missing pin joining the lever to the cable

Mar 05, 2013 | 1999 Mercury Cougar

1 Answer

Engine off shifts engine on grinds when putting in gear


The clutch plate can only be fitted one way. If you noticed one side of the plate has a raised section that contains springs. The other side is flat. Puting the plate the wrong way round allows the raised section to hit the heads of the flywheel bolts and this is causing the clutch to spin even though you have the foot on the clutch. Make sure you have properly bled the air from the clutch system. Mostly there is a notice printed on the clutch plate which reads like flywheel side or this side away from flywheel

Jan 21, 2013 | Cars & Trucks

1 Answer

Clutch issues


This is a hydraulic clutch, meaning you push fluid to make the clutch move just like the brakes.
I would check the clutch master cylinder first to see if it is full of fluid.
The master or slave cylinder could have failed, among other things.
Grinding gears means the clutch disk is not moving.

Jul 01, 2012 | 2006 Saturn Vue

2 Answers

1997 Saab turbo (manual) won't move in gear


You will need to tear it down and inspect the drive train components for broken parts.

Jun 06, 2012 | 1997 Saab 900

1 Answer

Car with manual transmition shifts only when engine is off


have you checked the fluid in the clutch master cylinder? make sure there is fluid and the slave cylinder on the transmission is moving the clutch. if it is then the clutch may be worn out and not disengaging the clutch which means the clutch is still turning and you cant put it in gear. hope this helps

Feb 12, 2011 | 1990 Toyota Pickup

1 Answer

Hard to put my manual transmition kia sportage


YOU COULD HAVE FAULTY CLUTCH DISC AND PRESSURE PLATE.ALSO YOUR SHIFT LEVER LINKAGE LOOSE OR MISSING BOLTS AND COULD BE WORN OR DAMAGE.

Nov 12, 2009 | 1999 Kia Sportage

1 Answer

Car wont move!


Sounds like the trans input shaft may be broken.If the input shaft, which is connected to the clutch, is not transmitting rotation to the inside of the trans then what you describe will occur.

May 15, 2009 | 2005 Dodge SRT-4

1 Answer

Transmission problem


Your clutch plate is at the point of giving up totally. Replace it immediately and ensure the level of gear oil is proper. The clutch is responsible for transmitting the power of the engine to the wheels, so the plates must have worn out to the point where it can no longer transmit this motion. Also replace the OIL......................sodeep

May 03, 2009 | Ford F-250 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...