Question about 2005 Chevrolet Malibu

1 Answer

2005 gmc canyon itook off the battery cables to clean them,after putting then back on,the powerdoor locks and the drivers power window will not work,everything else is ok

Posted by on

  • truck troubl May 03, 2009

    driver window and all locks work when they wont to.

  • yadayada
    yadayada May 11, 2010

    Did you hook all the battery wires up correctly, was there any corrosion damaged wiring?

×

1 Answer

Both the positive and negative cables and terminals are fine,i just took them off to clean the battery posts,thanks

Posted on Nov 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Battery was boosted, resulting in loss of power locks and drivers power window, no prior problems


the jumpstart caused a power spike which blew one or several relays or fuses. remember there is a fuse panel inside AND underhood.

Nov 15, 2013 | 2004 GMC Canyon

1 Answer

2006 GMC Canyon Drivers side window won't work and door locks will not lock


Hey fredline,- thanks for your help. With these steps it works perfect! I had these problems with my 2005 Canyon, and now with your posting anything runs well!!! Thanks a lot.

Andy (Germany)

Feb 01, 2013 | GMC Canyon Cars & Trucks

1 Answer

2005 gmc canyon loses power when putting on the breaks, lights dim and heater fades in and out


I have an 05 canyon. It was running rough and losing power at stop lights. I got the throttle body cleaned and it runs great now. Try that its an inexpensive fix. It needs to be done about every 25,000 miles.

Jan 26, 2013 | 2005 GMC Canyon

1 Answer

2005 GMC Canyon windows won't roll back up on driver and passenger side.


2005 gmc canyon.driver side window and lock does not work.have relpaced switch. the new switch now giving the same problem.

Jan 18, 2011 | 2005 GMC Canyon

1 Answer

My drivers side window doesnt work and my power locks ,everything else seems to be fine but i just changed my battery and terminals cause my truck kept dying and i had to get a jump 3 times please help


you should disconect the leads off the battery and tape them together for about 15min then reconect them, i had the same problem, it worked for me.

Dec 28, 2010 | 2005 GMC Canyon

1 Answer

No power window on drivers side and no power locks


I have had so many problems with locks, windows and mirrors and can honestly say it is almost ALWAYS the switches and not the motors!
drivers window has been used the most in this car (almost definately) so has worn out first - suspect the switches first

Jan 16, 2010 | 2005 GMC Canyon

1 Answer

Relay System Location - Power Locks/Window


under the hood right in front of battery is a fuse box

Jan 13, 2010 | GMC Canyon Cars & Trucks

Not finding what you are looking for?
2005 Chevrolet Malibu Logo

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...