a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
. If the box has been performing as expected and this has just started ( manual box ) I would be checking the gear selector either on the side of the box -- in the selector levers or in the cable operation. As the movement for all three gears is in a forward direction and you may have a cable operation to select the gears check the cable for failure. It the selection is at the base of a steering column then check for failed bushes and if it is a top mounted lever directly into the gear box then check that the pin that pivots the gear lever is tight and not worn. I am reasonable confident that the problem is in the selection mechanism and not in the box proper.
Hey I have a 1999 cavalier z24 5spd All my gears work except 5th while puttting it into 5ht gear as i let out of the clutch its grinding so i cannto put in 5th or it will grind, but at times it would work, but recently as Ive been driving I go to put it in 5th, there isn't a grind its as 5th gear is just netural NEED HELP geoff
Car is in limp in mode unless you have the tools to work on automatic transmission you will need to take it to a transmission shop. Of course you can check oil level but I suspect you have other issues.
if it only revs when you put it in 5th gear then it is not in fifth gear. it may look like it but it is not. try moving the gear selector from fourth into neutral releasing the clutch fully then applying the clutch and initiating fifth gear. if that does not work try placing it into one of the other gears first without releasing the clutch and then selecting fifth.
you should be fine driving in four gears as long as you dont travel on the audobahn or at speeds like your on the audobahn. Just watch your redline. try not to go past it. i think it is actually better for your car to drive at higher revolutions than lower as it cleans out your combustion chamber of carbon. on the other hand it is ******* your engine to drive in the red line constantly.
but 3000 rpm in 4th gear probably has you driving 130km/hr (82mph) which should be sufficient and your redline probably does not start until somewhere between 4-5k