Question about 1996 Jeep Grand Cherokee

1 Answer

96Grand Cherokee ,headlights

My jeep has no low beam lights, I replaced the switch still no lowbeam ???

Posted by on

  • gdwyatt Jan 26, 2009

    I have the same problem with low beam lights. High beam is fine but lights go out completely when activating dimmer switch. I will be troubleshooting tonight with test light and will follow up.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 99 Answers

Why did you replace the switch without checking the headlight bulbs first? Suggest you check the headlight bulbs, if they are good, then check the connectors, if they are good, then check the fuse box. Sometimes there is a fuse for the healights right and left. If all of that is good check your ground connections. If all of that is good, then is to basics........check continuity on the harness, ensure there is current through the connector to the lights contact.

If all of athe above is good, then I always advise to check the fuse links. You might have burned one out. They are usually located near the battery.

Posted on Nov 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jeep cherokee headlights flicker flash


Best guess is the Hd. Lt. Relay.
Probably will have to be replaced.

Apr 02, 2014 | 1993 Jeep Grand Cherokee

1 Answer

CHANGED HEADLIGHT ASSEMBLY ON 2002 JEEP LIBERTY ONLY HIGH BEAM LIGHT COME ON


Try flicking the mulit-function switch high beam on and off. There has been known problems with this switch, but mostly the first place to start is with some new light bulbs.
Or possibly your low beam filaments are burnt out. You have to replace the bulbs. Each bulb has a lowbeam and a high beam filament.

Apr 10, 2013 | Jeep Liberty Cars & Trucks

1 Answer

Lowbeam headlights not working at all.


If you know the low beam bulbs are good, I would check for power in and out of the dimmer switch first. The dimmer switch directs power to each circuit.

Jan 08, 2013 | 1993 Jeep Grand Cherokee

1 Answer

Lowbeam headlights wont work, brake lights are out and check engine light is on...changed th dimmer switch, no luck


For the low beam problem, Swap relays 45 & 46 in the underhood fuse panel. Relay 46 is for the Low Beams. If that fixes the light, replace the relay that cam out of position 46.
Since the high mounted brake light is working, that indicates that the brake switch is good. You need to check the bulbs in the rear tail light assembly, if they are good, check fuse #34.

Sep 01, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

Lowbeams do not turn on. Highbeams work.


Replace both low beam headlights. It's common to have one headlight burned out and you may not realize it for months. Then the other one goes out and "puff" you have NO low beams.

Feb 22, 2010 | 1996 Jeep Cherokee Country

2 Answers

97 cherokee, lowbeam headlight won't go on?


Try putting your tilt steering wheel all the way up and see if it comes on. Ors did that and we had a pinched wire in the steering column.

Jan 15, 2010 | 1997 Jeep Grand Cherokee

1 Answer

My left headlight highbeam light works and the lowbeam don't why


the filament on the low beam burnt out. but the high beam didn't. You have a filament for each. 1 for high beam and 1 for low beam in the same light bulb. You need a new head light.

Sep 07, 2009 | 1998 Ford Windstar

1 Answer

Highbeam Headlights not working


try replacing the fuse because low beam and high beam are two different systems

Aug 07, 2008 | 1996 Chevrolet Cavalier

1 Answer

Daytime safty lights


Sounds like the bulbs need replacement. The high beams are separate from the low beam/daytime running lights.

May 18, 2008 | 1990 Buick Century

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...