Go to Ebay, search for the part you need and rough price. Ebay charges them 8-9% so the part should be cheaper elsewhere. Then try contacting them direct to see if they fit the part as well. Other options are alibaba.com or aliexpress.com. If you speak chinese Taobao IS the cheapest if you can wait 30 days.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if you are just changing a bulb I believe its a9005 or9006 hi or low beam if you oar taking lense out you have to the shield under bumper then the screws on inner fender where it attaches to front bumper then theres a 10 mm size bolt in corner of bumper that goes strait up into fender once that's out, pull on side of bumper. itll pop out theres clips that hold it on. then you can get to bolt on bottom of light,get that one and top ones and you can pull lense off. just smack bumper to put back on you only need to pull back side your changing
Would imagine so but never seen this vehicle so i have no practical experiance but a lot of modern vehicles i have to remove the front bumper/valance just to change a headlight bulb as you have to remove the headlight for this and normally their a collection of torx headed bolts so its a question of finding them thats all .
To remove the headlamp assy. you need to gain access to the
bolts that are hidden by the front bumper.. you need to pull back the
inner fender well closest to the edge of the front bumper and there is a
10mm bolt going into the bumper you need to remove then you will be
able to pull the edge of the bumper away from the fender you will need
to remove any clips and or bolts around the grill area to give enough
room to pull the bumper cover out of the way enough you need to get your
hand and a wrench or socket into the lower part of the fender there is a
bolt there that holds the headlamp assy. in remove that bolt as well as
the other bolts on the top of the core support and then you will be
able to move/wiggle headlamp out enough and disconnect the wiring and
remove the assembly be careful not to scratch the fender or bumper
cover.. you may want to put some masking tape on the fender and bumper
cover so as not to scratch during removal.
NO it is NOT under the hood or the fender IT IS in the back under the plastic cover that covers the spare tire. Open your tailgate, lift the cover that hides your spare tire. The battery is between the spare tire and the back bumper. If the battery is dead you can not open the tailgate, You need to open the side door and climb into the back. Who ever thought about putting the battery back there and having an electric tailgate is a nut! Good work GM
start removing the grill and bolts holding the bumper in the side of the grille or holding the grille then loosen the fender liner were it meets the bumper and at the top edge of the bumper were it meets the fender they have a 10mm. bolt holding the bumper and voila bumper is off really easy....