Question about 2000 GMC Yukon XL

1 Answer

2000 yukon xl

How to reset change oil light

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 7 Answers

Turn the key to the run position engine off, push the gas pedal all the way to the floor then release it 3 times within 5 seconds, the DIC will say oil life reset.

Posted on Nov 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to reset the change oil light on 2002 yukon Denali


this is in the operators guide, lost that?

Jul 15, 2014 | 2003 GMC Yukon XL

1 Answer

How to reset service lamp after oil change on a 2000 yukon gmc


I have a 2005 GMC Envoy and you turn the key to on, then press the gas pedal to the floor three time in 5 sec. The oil light blinks once and your done. I'd give it a try. Remember engine off but the key is on. Can't hurt to try it. Otherwise you'll need an owners manual to figure it out.

Feb 12, 2011 | 2000 GMC Yukon XL

1 Answer

How do you reset oilchange light on a 2001 yukon xl


turn key to on position, pump gas pedal to floor 5 times and turn off key. start vehilce. Change oil light should flash for 7 seconds and then go out.

May 15, 2010 | 2001 GMC Yukon XL

1 Answer

How to reset oil change light?


Make and Model: Chevrolet Suburban, GMC Yukon XL, Chevrolet Silverado, GMC Trucks Sierra
Years: 2000-01, 1999-00

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.

Hope this help (remember rated and comment this help) Good luck.

May 14, 2010 | 1999 GMC Sierra

1 Answer

HOW DO I RESET THE CHANGE OIL LIGHT ONCE THE OIL


look in the manual......turn the ignition to the on position not starting it of course and then pump the gas petal 5 times then the light will blink a few times turn off then back on...problem solved

Jan 30, 2010 | 2002 GMC Yukon Denali

1 Answer

I changed the oil and do not know how to delete the message, is ''change engine oil'' in the display panel. what can I do?


Chevrolet Suburban/GMC Yukon XL, 2000-05 Chevrolet GMC Trucks Silverado, Sierra, 1999-05 Chevrolet Venture 2000
Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.

Good luck and please rate. Keep me posted, and thank you for using fixya.

Jan 14, 2010 | 2004 Chevrolet Silverado

1 Answer

How do you reset oil change indicator?


Chevrolet Service Light - For Chevrolet Suburban, GMC Yukon XL, Chevrolet Silverado, GMC Trucks Sierra 2000-01 and 1999-00:

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.

I really hope helps with this (remember rated this help) Good luck.

Jan 05, 2010 | 2000 Chevrolet Silverado

1 Answer

How to reset the change oil light on a 2003 chevy silverado


Information courtesy of synthetic-direct.ca
Chevrolet Suburban/GMC Yukon XL, 2000-05 Chevrolet GMC Trucks Silverado, Sierra, 1999-05 Chevrolet Venture 2000
Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.
Best of luck.
Greg

Jul 15, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

How to reset computer showing percentage of oil life remaining


If it is anything like the 2003 you turn your car to the on position without running the engine, tap the accelerator 3 times very quickly in less than 5 minutes. This should reset your back to 0 for your next oil change.

Apr 03, 2009 | 2003 GMC Yukon XL

1 Answer

Engine Oil Life


Change Your Oil And Filter Then Remove The Negative Battery Cable To Reset It.

Jan 07, 2009 | 2005 GMC Yukon Xl Denali

Not finding what you are looking for?
2000 GMC Yukon XL Logo

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...