Question about 1996 Jeep Grand Cherokee

2 Answers

Electrical problem I have a 93 jeep cherokee and it keeps blowing the engine control fuse i dont know why it does that i checked it as much as i can but i cant figure it out can anyone help me with this problem.

Posted by on

  • AbrahamM211 Nov 05, 2008

    ok i will try that thanks alot

×

2 Answers

Let me know what you find and if solved.

Posted on Nov 06, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 99 Answers

You need to look for a positive wire that is shorting out. Follow the wiring harness until you fine either one that is grounding out or in other words touching metal. You will need a lot of patience, and good volt ohm meter for testing.

Also you might possibly have a wire with melted insulation that is causing the short. Once you isolate the short, everything should be fine.

Posted on Nov 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

93 Jeep Grand Cherokee Limited keeps blowing the 40 amp. ignition fuse. All systems go til I engage the ignition /starter. Tested Starter, It was fine


These trucks have a bad defect I mean bad
change you computer. An get it from jeep
see where the the plug plugs inn the solder is broken
you can test it but u really need to know wht
your doing

Jun 03, 2014 | Cars & Trucks

1 Answer

94 Jeep Grand Cherokee 4x4 with the 4.0 Keeps blowing the fuse that controls the fuse box inside the jeep, its blowing a 40 amp fuse. I believe there is a short. but i don't where to look.


Get yourself a set of factory wiring diagrams,
otherwise your wasting your time

You have no idea what you working on, without
reference material

Helm.Com

Jun 20, 2012 | 1994 Jeep Grand Cherokee

1 Answer

I wanted to know what fuse 8 in the 1995 jeep grand cherokee controls?


We assuming that you are talking about Fuse Block Compartment (inside the car) and the Fuse 8 15AMP work for Fused Battery-Memory Circuits

Additional details could fin in the Jeep-ZJ-Secc-8W-Wiring-Diagrams; keep in mind that you have a nice SUV, I have the same but '93 Grand Cherokee Limited 5.2L V8.

Good luck.

Mar 07, 2011 | 1995 Jeep Cherokee

2 Answers

Jeep Grand Cherokee 2.7CRD (2004) auto won't change gear and has the check engine light on. Error code P0700 is on the dash when i checked, this means - Transmission Control System Malfunction. What do i...


check all the fuses before you do anything else. After all a fuse provides power to the electronic box that controls the transmission. Other than that I would not advice on a more complicated troubleshooting since there is no way for you to test a bad transmission computer, even mechanic shops don't know how to test them. The only thing they would do is slap a known good one and see what happens.

Dec 27, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Blowing engine control fuse on 94 grand cherokee


You might have a wire from the engine control circuit that has rubbed through on the engine block somewhere. Do a visual inspection of the engine wiring, and look closely for any damaged insulation. I have seen a problem like this before. Good Luck!

Sep 28, 2009 | 1994 Jeep Grand Cherokee

2 Answers

Blowing fuses jeep wont start


use a circuit breaker or paper clip with pliers so you do not burn yourself use paper clip as fuse unplug engine controll sensors 1 at a time and check if problem is gone after each one is unplugged an engine controll sensor is most likely shorting out if you have a map sensor try that first then move on to other components tps,fuel pump ect. till you find wich is fauly causeing short this should help you just be carefull with paperclip am saying to do this instead of blowing expensive fuses

Aug 25, 2009 | 1995 Jeep Grand Cherokee

1 Answer

1994 jeep cherokee rear dome light problem


Check to see if you have inadvertantly hit the push switch on the rear dome lite. Click it once and try
your lites again..I had this happen on my 93 jeep and that was the problem.

Dec 29, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...