Question about 2005 Acura TL
How do you change the plugs on 2005 acura tl
you need a 6 inch extension, short 3/8 ratchet, 5/8 plug socket, 3/8 swivel "u" joint, (sold at sears) 8mm 1/4 drive socket deep well and 1/4 inch ratchet.
find the coil packs (6 total, three in each head.)
remove the two retaining nuts holding each coil pack using 1/4 8mm socket and ratchet.
twist the pack to break the sticking boot below.
pull up (be careful to not rip the boots however it may still happen but rare.)
remove coil packs, the rear is a little more difficult with the intake.
use 6" extension and u joint and ratchet to remove plugs and replace.
reverse order to assemble. Good luck, and hoped this helped.
Posted on Jan 04, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
May 09, 2015 | 2010 Acura TL
Jan 28, 2014 | 1998 Acura TL
Mar 27, 2012 | 2000 Acura TL
Nov 29, 2010 | 2005 Acura TL
Aug 03, 2010 | 2005 Acura TL
Oct 24, 2009 | 2005 Acura TL
Jul 24, 2008 | 1999 Acura TL
Oct 10, 2015 | 2005 Acura TL
5,206 people viewed this question
Usually answered in minutes!