Question about 2001 Lexus RX 300
When you have P0440, P0441 and P0446, it is a very good bet that the fuel cap was loose, or the fuel cap rubber seal is compromised. You will get all three of those codes every time that the cap is loose. Always make sure that the fuel cap is as tight as you can get it after you refuel.
Posted on Nov 13, 2008
I have a 2000 lexus rx 300 I have replaced the evap canister. Then I had a code 0440 pop up and a code that said fule mixer sensor code pop up I had this replaced. Now the evap canister malfunction code is back 0440 and no other code what is the problem?
Posted on Jun 18, 2009
Tips for a great answer:
Jun 07, 2014 | 2001 Pontiac Aztek
On this make the warning lights all come on together, the check engine light is the cause of all.
When the service engine soon light (Also called the check engine light or engine management light) is turned on this is to alert you to the fact that Powertrain Control Module (computer) has detected a failure somewhere in the systems it controls you may not feel any difference in the way the engine runs, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.
Nov 06, 2012 | 2007 Lexus GX470
Jun 04, 2012 | 2001 Lexus LS 430
Apr 03, 2012 | 2009 Lexus ES 350
Sep 14, 2010 | 1999 Lexus ES 300
Oct 02, 2009 | 2003 Lexus Gs 300
Jun 17, 2009 | 2001 Lexus LS 430
Jan 27, 2009 | 2004 Lexus LS 430
2,339 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: