Question about 1994 Toyota Corolla

2 Answers

Toyota Corolla 1994

There is a hose that channels antifreeze located behind the engine of my 94 Toyota Corolla, it has 2 ring clamps that secure it to what I believe is the water pump. I need to replace this hose, as it is over 14yrs old and has ruptured causing the radiator to completely drain all the anitfreeze. I can NOT find the proper name of this hose. WE U PLEASE HELP..... THANK YOU!

Posted by on

  • dessourcd Nov 29, 2008

    i want to know are to replace it there is no room

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

The hose is called the "water inlet hose"; and there are 2 different ones, depending on your engine size. You will probably not find this at an auto parts store, but, here are the 2 different part numbers, if you want to go to a dealer for the part:

1.6 Litre: 16322-15050 $54.04 US

1.8 Litre: 16332-16060 $44.87 US

This should solve your problem.
Thnaks for choosing FixYa.

Posted on Nov 05, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 288 Answers

These are also referred to as "Top Radiator Hose" and "Bottom Radiator Hose." They are available from most auto parts stores. Sometimes it may be necessary to trim the newly purchased hose to the correct length. Use a razor-knife to do this.

Frank
Frank's Friendly Cars Maui Car Rental
www.MauiCarRental.biz

Posted on Aug 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Interchsnge yesrs or other make,/models for Starter in 1994 Toyota Corolla


If it's the 1.6 motor then 94 to 96 corolla take that starter only. But if it's a 1.8 motor then 94 to 97 take that starter and also geo prizm 94 to 97 takes that starter

Aug 15, 2014 | 1994 Toyota Corolla

1 Answer

Ive got a 1994 toyota pickup v6 4wd im leaking antifreeze from somewhere behind the motor and its a lot what is leaking and do i fix it?


You have 2 hoses going thru firewall to heater core,check them out,also check other ends going under intake.might just be a loose hose clamp or your heater core is clogged.Is floor board wet.

Mar 24, 2013 | 1995 Toyota Pickup

1 Answer

How to find the thermostat and replace it ?


Locate the Thermostat
  • Find the hoses that leave your radiator.

  • Trace the top hose back to your engine.

  • Locate the thermostat housing attached at the end of that hose. Verify the location in your owner's manual, as some manufacturers house the thermostat at the bottom of the radiator rather than the top. This makes removal far more difficult.


Replace the Thermostat Locate the clamp that secures the thermostat to the radiator hose. Unscrew this clamp and gently remove it from the engine. You might see radiator fluid or coolant come out of the hose at this stage, in which case you can catch it in a drip pan and dispose of it later on. Unscrew the bolts that secure the thermostat to its housing. Wipe out the inside of the hose with a rag to ensure it is free of debris. If anything falls into your radiator, it can result in expensive repairs. Replace the gasket. Install the new engine thermostat. Make sure the power unit faces the engine. Replace the bolts to secure the thermostat housing to the radiator hose. Reconnect the hose and tighten the screws in the clamp

May 18, 2011 | 2000 Toyota Corolla

1 Answer

How do you replace bottom coolant hose on a 1994 toyota corolla?


Usually there is an engine splash guard made of plastic under the front bumper. You'll have to remove this first. Once the guard is off, you can clearly see how to get to the lower radiator hose clamp.

Jan 25, 2011 | 1994 Toyota Corolla

1 Answer

1993 toyota corolla how to replace watwr pump


  1. Place the water pump gasket (O-ring) on the block and install the pump. Tighten the mounting bolts evenly to 11 ft. lbs. (15 Nm). Install the timing belt covers, making sure they are properly seated and not rubbing on the belt or other moving parts. Install a new seal (O-ring) on the dipstick tube and lightly coat it with engine oil. Remove the plug and install the dipstick tube and dipstick; secure the mounting bolt to 82 inch lbs. (9 Nm).
Using a new O-ring, install the inlet pipe to the water pump.
Attach the clamps and bolts to hold the pipe in place and tighten to 7-9 ft. lbs. (9-12 Nm).
Connect the water inlet and water bypass hoses to the inlet pipe.
Install the water pump pulley and temporarily tighten the four pulley bolts.
Install the drive belts on all the pulleys and adjust all of them to the correct tension.
With the belts in place and adjusted, the water pump pulley will now resist turning. Tighten the pulley bolts to 16-18 ft. lbs. (22-24 Nm).
Install the front engine mount (mounting insulator).
Confirm that the draincocks are closed on the engine block and radiator. Refill the engine with coolant. Reconnect the negative battery cable. Start the engine and check for leaks.

Jul 20, 2010 | 1993 Toyota Corolla

1 Answer

I cant find the fuel pump relay in a 94 toyota


relay should be inside the hood next to engine there is a fuse box cover stated what relay are uses.

Jun 04, 2010 | 1994 Toyota Corolla

1 Answer

How do i put fuel pressure regulator in my 1994 BMW 325i


Fuel pressure regulator is located on the fuel rail. 1. Remove top engine covers and fuel rail mounting bolts. 2. Disconnect vacuum hose. 3. Remove regulator clamp, noting position of regulator. 4. Pull regulator out with shop towel (full of fuel) don't lose thrust washer behind. 5. Replace with new O-rings.

Jan 04, 2010 | 1994 BMW 3 Series

1 Answer

Install a gas tank in a 94 toyota corolla


Raise the car.

Loosen the fuel filler neck rubber hose clamp. Remove hose from tank. Insert tubing into tank and siphon out all fuel.

Undo the brake line bracket blots and move brake lines out of the way.

Undo the exhaust to muffler flange bolts. Exercise extra care if they appear rusted as they will shear off.

Remove rear seat and undo fuel pump cover. Undo fuel pump bolts.
'
Disconnect the fuel and return lines.

Support tank with a jack. Undo tank strap bolts. Remove straps.

Lower tank and remove fuel pump.

Drop tank and slide out over exhaust.





Nov 02, 2009 | 1994 Toyota Corolla

2 Answers

Is it the water pump???


There is a short bypass hose on the back of the pump that is notorious for leaking.

Your car has a vehicle speed sensor int he transmission, it does not use a speedo cable.

Sep 13, 2009 | 1994 Toyota Corolla

1 Answer

Cant find loction of themastat 1994 toyota corolla


I would say it is at the top radiator hose where it connects to the engine. Should be a small part with two bolts on it connected to the engine with the hose connected to it.Take the two bolts out and the thermostat is under it

Nov 21, 2008 | 1994 Toyota Corolla

Not finding what you are looking for?
1994 Toyota Corolla Logo

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...