Question about 2004 Chrysler PT Cruiser

1 Answer

I changed the battery and still have a no start. Guages light up, then nothing when I turn key to start.

2004 pt cruiser, 39K mi, 2.4 high output turbo.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

It is important to check teh oil. Low oil means low oil pressure and the car will not start. Try that good luck

Posted on Sep 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i turn my security light off so i can start my car?


Jeremy: According to eHow.com: "
  • 1 Press the "Unlock" key on your key fob to deactivate the alarm and unlock the car doors. If you've lost your key fob, unlocking the driver's side door with the key automatically deactivates the PT Cruiser's alarm.
  • 2 Look for the black alarm box underneath the dashboard, on the driver's side of the car. Locate the override button on the box -- either a black or red button, depending on the year of the PT Cruiser -- but don't press it yet.
  • 3 Put the key in the ignition and turn the key so that the battery is on, but the engine doesn't start. Quickly push and hold in the override button until you hear the alarm sound once, indicating the alarm is disabled.


  • Read more : http://www.ehow.com/how_7739471_disable-cruiser-factory-antitheft-system.html"

    Mar 15, 2015 | 2001 Chrysler PT Cruiser

    1 Answer

    How do i reset my factory alarm on a 2004 pt cruiser 2.4 dohc turbo high output


    many are connected to the drivers door lock.... doing this twice......... turn KEY to the left / pause . turn it to the right/ pause.. 2 times ... should reset it .

    Jul 22, 2014 | Cars & Trucks

    1 Answer

    Pt Cruiser 2004 Turbo How to determine if starters bad?


    pull the starter motor and have it bench tested for worn bushes ( allowing the armature to pole out) and brushes worn too far down

    Jul 15, 2014 | 2004 Chrysler PT Cruiser

    1 Answer

    04 PT Cruiser s off while driving and wont turnover at all


    have a load test done on the battery as it may be dead flat or have a failed cell. Check the alternator output and check the condition and tension of the drive belt

    Mar 15, 2014 | Chrysler PT Cruiser Cars & Trucks

    2 Answers

    My 2006 pt cruiser wont start, no lights or radio. nothing? when i turn key nothing happens inside or out


    Check the battery terminals for corossion. Look for the chalky white powder which is a tell tale sign. Simply move the cable connectors back and forth a few times to loosen corossion and provide a better contact. Have you checked your fuses. I probably spelled corossion wrong, sorry.

    Apr 25, 2010 | 2002 Chrysler PT Cruiser

    2 Answers

    Pt wont start or turn over


    try to get a jump from a friend and see what happens, does the same, faulty starter, may need replacing, try to use small hammer and tap lightly on the starter couple time and have a friend start the car while you tap lightly on it. check ignition switch where you stick the key in. stick the key in the ignition and turn the key back and forth jiggle and wiggle it and see if your igniting will make contact. do it several time to test and see if its the ignition problems, this part is not cheap to replace.

    Sep 25, 2009 | 2004 Chrysler PT Cruiser

    2 Answers

    2002 PT cruiser trying to start with no key!


    Sounds like a short somewhere. Check the wiring around where he put the radiator in and make sure nothing is pinched, chafed, pierced or otherwise out of place.

    Jul 22, 2009 | 2002 Chrysler PT Cruiser

    1 Answer

    2004 touring won't start


    Try changing your fuel filter and checking your fuel pressure. Can always try runiing injecter cleaner after new fuel filter put in. Good luck

    Apr 06, 2009 | 2004 Chrysler PT Cruiser

    1 Answer

    WON'T START


    my 2006 pt cruiser won"t start. the light do come on but it will not turn over just a clicking sound. i drove it for about an hour then went back to it 30 mins later and it didn"t start. just clicking sound.

    Sep 21, 2008 | 2006 Chrysler PT Cruiser

    Not finding what you are looking for?
    2004 Chrysler PT Cruiser Logo

    323 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chrysler Experts

    yadayada
    yadayada

    Level 3 Expert

    61249 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    chargerhp
    chargerhp

    Level 3 Expert

    813 Answers

    Are you a Chrysler Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...