Question about 2006 Ford F-150

3 Answers

Horn not working on a 2006 ford f250 xlt

We Just bought a used 2006 ford f250 xlt and the horn doen't work. Problem is we can't find where the horn is located on the truck to fix or replace it. Is there fuses also? Thanks

Posted by on

  • 2 more comments 
  • peinsmann Apr 09, 2009

    emissionwiz he is correct, I have the same issue but in my case the horn will not shut off so I pulled fuze 37 under the dash. I think there is a recall on the part. The horn is under the batt on the right side it is ver hard to get at.

  • seatime37 May 13, 2009

    I have the same problem, my horn does not work 2001 f250 superduty. I am thinking it is the fuse but have been wrong before. Any suggestions?

  • Anonymous Mar 14, 2014

    brought used please help:(

  • yadayada
    yadayada Apr 27, 2014

    Yes I agree that You likely have defective horns. Do you off road? Water can destroy a horn and it is down low near the wheel house behind the bumper, one on each side, a high pitch and low pitch horn.



3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Ford Master
  • 77,499 Answers

The cause of this is not the horn or fuse in most cases, it is caused by the rotating contact that connects the horn button, in order to repair this you will need a new clock-spring contact, to install the airbag must be disarmed, his has to be done by the book or serious injury can result.

Posted on Nov 11, 2008

  • jeff shoemaker
    jeff shoemaker Apr 27, 2014

    I replaced my fuse after I found it wasn't working and it sound like only one was working,but now it's not working at all. I check the fuse and it is still good. I pushed the horn and you can hear the relay clicking, I think my hors quit working all together.


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It should be inside the right front fender. Right down at the tip. You can see it if you lay on the ground and look up into the fender. Probably took some engineer awhile to hide it that good!

Posted on Jan 25, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Where is the horn located on a 2005 ford f250 super duty?

Posted on Jan 06, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need the wiring diagram for the clutch pedal of a 91 ford f250 lariat xlt

surely you jest .been working on vehicles many years and never had a clutch with wiring they are all mechanical

Mar 15, 2015 | 1991 Ford F250

1 Answer

Horn Blows non stop until it dies and then stops working 2006 F 250

Sounds like a short some place. Electrical, intermittent problems are hard to detect. Process of elimination.

Apr 16, 2014 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Where is the speedometer sending unit located 1993 ford f250 XLT 4x4

My parts book shows a speed sensor in the side of the transmission where the cable used to be.

Sep 29, 2012 | 1993 Ford F250

1 Answer

Show spout connector location 1989 ford f250 xlt

if you look on the distributor you will see the large connector for the mudule bolted to the side. The spout connector will be within inches of the module connector.

Feb 06, 2012 | Ford F-250 Cars & Trucks

1 Answer

My 1999 7.3 diesel f250's airbag light flashes and the horn doesn't work. When you blow the horn you hear the relay (or whatever its called) in the fuse box click but no horn sound is heard.I bought this...

if the relay is clicking when you push the horn button then i would say there is a problem with the horn, if you can get to the horn tap on it with a small hammer or unplug the wire and test it with a test lite

Mar 22, 2011 | 2002 Ford F250 Super Duty SuperCab

1 Answer

2000 ford f250 with 7.3 diesel horn and cruise stopped working. Replaced clock spring wireing harness but cruise still not working

Do you have a multiswitch on this? Cruise not working would indicate that to me. The horn you got working, then, with the clock spring wiring.

Check to see if the cable for actuating the cruise underneath the hood at the throttle body is broken or not.

Jun 28, 2010 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Horn not working - very weak

Its the horn unit itself just replace it but check the connection on the horn first.

Mar 03, 2010 | 2006 Ford Explorer

1 Answer

2006 Ford F250 Horn Problem

That is going to be a dealer item only. If your out of warranty you can try to find a used one from a salvage yard.

Dec 29, 2008 | 2006 Ford F-250 Super Duty

Not finding what you are looking for?
2006 Ford F-150 Logo

3,313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5608 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides