Question about 1999 BMW 323 Series

1 Answer

Hi,ive got the abs,traction control and handbrake light lit on my dash.the lights are on constant.can you help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, the lights get lit when the brake fluid level in the reservoir falls too low or the fluid level signal is broken due to dirt in the connector. You could remove and install the sensor electric connector, located above the reservoir, and carefully knock the reservoir to release the possibly stuck level sensor.

Posted on Dec 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ABS and Traction Control failure with check engine and steering lights additionally illuminated


look listen and dance not matter how you performance keep it calp and trust it

Feb 20, 2014 | 2008 Volkswagen Rabbit

1 Answer

Warning lights stay lit-


this dealer is a joke abs maybe faulty sensor traction control try check the fuse on the fuse box if is blow replace if nothing happens needs a computer diagnostic

Dec 30, 2013 | 2008 Lincoln MKX

2 Answers

Handbrake & traction lights on when applied brakes


All your doing is applying the brake pedal

That is the only computer input,so maybe the
switch is loose or bad- next to the brake pedal

I would scan for computer data & codes- especially
the body & abs braking system

Mar 08, 2013 | Cars & Trucks

1 Answer

How to reset renault laguna ABS, Service and Handbrake malfunction lights


Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module

Oct 23, 2012 | Cars & Trucks

1 Answer

Abs and traction control dash lites come on and off at various time..sometimes never come on


Your abs and traction control lights should only come on when you start to slide while breaking(ABS), and when your wheels spin in place when excelerating(TC). If those 2 things don't happen, which with some people they never do, you should never see the lights come on. Only when those mechanisms are in use do the lights come on. And they will always flicker as that is what abs and tc are, intermitant surges to break up the constant. ABS does this for obvious reasons...anti lock break, so when you slide, the abs "taps" the breaks in short bursts so they don't lock up. TC "taps" the exclelrator when it slips. Those "taps" are what trigger the lights on your dash, which is why they flicker and don't stay on.

Sep 26, 2012 | Cars & Trucks

1 Answer

1999 Freelander TC/DHD/ABS Lighs lit on dash


Read my post on landrover enthusiast comes under abs last resort lozzzz

Feb 22, 2010 | 2002 Land Rover Freelander

2 Answers

Abs and traction contol light up


I'd have the brake accumulator checked. Try this. From a cold start, e.g., an overnight stop, release the handbrake (as it also operates the dash berake light), start the engine, and time how long it takes for the brake light on the instrument panel to go out. If it's up near 45 seconds, your accumulator is probably on the way out. They do fail after some years.

Aug 30, 2009 | 1995 Land Rover Range Rover

1 Answer

ABS LIGHT AND TRACTION CONTROL LIGHT ON DASH


make sure u didnt break a wire, there are sensors on the brakes, make sure theyre plugged in

Jun 10, 2009 | 1999 Cadillac DeVille

1 Answer

2001 Mercury Grand Marquis brake and ABS dash lights on and off


The red brake light is the key here. That usually indicateds a hydraulic problem. Check you fluid level in master cylinder and see if it is low. Also the level indicator sensor there in the master cylinder maybe sticking or corrioded. If ABS sees the red brake light it will shut off and turn on the ABS light,also traction control would be disabled as well.

Feb 04, 2009 | 2001 Mercury Grand Marquis

Not finding what you are looking for?
1999 BMW 323 Series Logo

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

271 Answers

Doberman

Level 2 Expert

251 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...