Question about 1992 Isuzu Trooper

2 Answers

Oxygen sensor light

I need to reset my oxgen sensor light. I have tried disconecting the battery

Posted by on

  • teyssier01 Nov 14, 2008

    tropper 1992 ligths on> O2, U/S Ar ANTIBLOCK really dont know what those things are for? can you help?? thanks

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

After you remove about 8 phillips screws that hold the dash on you can unplug everything that is attached to it.You will see 2 phillips screws that hold the speedometer remove them. Then remove the plastic cover from the steering column(look on the under side you will see the recessed holes remove the 3 phillips screws). The cover will separate into 2 pieces. with that out of the way look on the left and right side of the steering column remove the 2 phillips screws (they point up and hold the bottom of the speedometer cluster. Unplug the connectors pull it out and look at the back you will see ksw marked in 2 places move the phillips screw from one to the other. That resets the ox. sensor.

Posted on Nov 16, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem when i had a new oxgen sensor put in i did find out that it is in the dash behind your speedometer i tried to do it myself but i got the dash off but i couldnt get the rest off so i just left it untill i can get a diagram to show me the rest of the way i hope this helped a little.

Posted on Nov 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel milage at 17mpg...what to look at?


THE FUEL MILAGE ON THAT PARTICULAR VEHICLE SHOULD BE SOMEWHERE AROUND 17MPG IF IT IS EQUIPED WITH THE 4.0L V6. ONE THING YOU MIGHT WANT TO TRY IS TO RESET THE K.A.M. ON THE VEHICLE. THIS WILL RESET ALL OF THE FUEL CURVES AND OXYGEN SENSOR PARAMETERS AND ALLOW THE SYSTEM TO RE-LEARN HOW MUCH FUEL IS NEEDED TO RUN PROPERLY. TO DO THIS YOU CAN SIMPLY DISCONNECT THE NEGITIVE AND POSITIVE BATTERY CABLES AND LET THE VEHICLE SET FOR ABOUT 10-15 MIN. AFTER THAT TIME TOUCH THE TWO CABLES TOGETHER FOR ABOUT 15 SEC. AND THEN REINSTALL BATTERY CABLES ON BATTERY. THIS MAY HELP IN YOUR CASE BACAUSE WITH A NEW OXGEN SENSOR, THE COMPUTER IS NOT USED TO SEEING THE CORRECT READING SO WHEN IT DOES GET THE READING THAT IT NEEDS, IT DOES NOT KNOW WHAT TO DO WITH THEM.

Oct 09, 2012 | Mitsubishi Montero Sport Cars & Trucks

1 Answer

How to reset DTC code after oxgen sensor replaced?


Year make and model also engine size. I'm not a fan of universal O2 sensors perhaps you should've put a direct fit on. To clear the codes depending on the year if the car removing the and make removing the battery negative, the ECM fuse or using a scanner should work.

Jun 19, 2012 | Toyota Highlander Cars & Trucks

1 Answer

2000 kia sportage computer reset after changing O2 sensors


Disconect battery for like 5 min to 1/2, he

Feb 28, 2012 | Cars & Trucks

1 Answer

Oxygen sensor i put a oxgen sensor in . the engine light is still on


Most auto stores will plug a diagnostic box into a plug under the dash. The car will then tell you why the light is on. Auto stores will do the diagnostic for free to sell you the parts you need to fix it. When they have your car plugged in they can also turn off the light. If the light comes back on you will probably need to do the recommended repair to keep the light off. It is possible the oxygen sensor was not bad or there were actually multiple problems causing the light to be on.

Aug 17, 2010 | 2003 Mitsubishi Galant

1 Answer

2001 grand prix eng. light is on code came back front oxygen sensor it was replaced light was still on code was erased took it in came back inconclusive they ask me to run it light came back on have run it...


have the code erased and reset the computer by disconecting the battery. if the code returns then replace the sensor again w a dealer replacement part if not done so already. many times aftermarket sensors or cheaper sensors that are supposed to be for all vehicles dont remedy the problem.

Mar 31, 2010 | 2001 Pontiac Grand Prix

1 Answer

Check engine light - sensor 2


Replace the sensor. Common problem. The heater burns out in them.

Jun 24, 2009 | 2000 Dodge Durango

3 Answers

Check engine light is on...bank 1 sensor1 oxygen sensor


if u have one oxygen sensor then u need to take a deep look at the bottom of ur car it will be somewhere at the Exhaust pipe if u have a catalytic converter then u will have two oxygen sensors one before the catalytic converter & the other will be after the catalytic converter. Note: the catalytic converter is located at after a little bit of beginning in Exhaust pipe.

Jun 06, 2009 | Dodge Grand Caravan Cars & Trucks

2 Answers

Suzuki ignis 2002 oxgen sensor functions


It gets pretty hot in there, and although hardly any manufacturers specify replacement intervals for oxygen sensors, they play a critical role in providing the ECM with acurate data for best running performance/economy. Change it, as the savings in NOT changing it will be soon eroded by increased fuel usage.

Apr 30, 2009 | Suzuki Swift Cars & Trucks

1 Answer

Oxgen sensor broke out of pipe


The only thing you need to be concerned with is the amount of wires that go to the oxygen sensor, you state that it is not the original engine but I assume that you still are using the original loom and computer control system for your truck and if so you can reference the oxygen sensor connector.. Will have to use same oxygen sensor for original engine....Good Luck

Jan 07, 2009 | 1991 GMC Sierra

1 Answer

Hi. fuel consumption and sensor


THE FUEL MILAGE ON THAT PARTICULAR VEHICLE SHOULD BE SOMEWHERE AROUND 17MPG IF IT IS EQUIPED WITH THE 4.0L V6. ONE THING YOU MIGHT WANT TO TRY IS TO RESET THE K.A.M. ON THE VEHICLE. THIS WILL RESET ALL OF THE FUEL CURVES AND OXYGEN SENSOR PARAMETERS AND ALLOW THE SYSTEM TO RE-LEARN HOW MUCH FUEL IS NEEDED TO RUN PROPERLY. TO DO THIS YOU CAN SIMPLY DISCONNECT THE NEGITIVE AND POSITIVE BATTERY CABLES AND LET THE VEHICLE SET FOR ABOUT 10-15 MIN. AFTER THAT TIME TOUCH THE TWO CABLES TOGETHER FOR ABOUT 15 SEC. AND THEN REINSTALL BATTERY CABLES ON BATTERY. THIS MAY HELP IN YOUR CASE BACAUSE WITH A NEW OXGEN SENSOR, THE COMPUTER IS NOT USED TO SEEING THE CORRECT READING SO WHEN IT DOES GET THE READING THAT IT NEEDS, IT DOES NOT KNOW WHAT TO DO WITH THEM.

Aug 19, 2008 | 1996 Ford Explorer

Not finding what you are looking for?
1992 Isuzu Trooper Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...