Question about 2007 Chevrolet Tahoe

2 Answers

Broken Driver Side Mirror (glass and motor only)

I bought the new glass and motor that turns the mirror but there are no instructions on how to take the guts out and replace. According to the dealer, it is relatively easy.

Posted by on

  • Anonymous Mar 29, 2009

    want to repair insides of power mirror. Housing is fine. 2000 Toyota camry right side mirror.

×

2 Answers

you must brake the mirror glass on your old one and pull it out in order to put the new one in!! 


good luck

Posted on Nov 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 22,041 Answers

Your lucky to find the parts ,,,,here in spain is a complete unit only

Posted on Nov 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace passenger side mirror. Glass is


You can usually just replace the mirror, any commercial auto-glass store has the glass you need. sometimes it is necessary to replace the mirror and its backing (a plastic frame which snaps into the adjustable motor) you don't need to replace the whole mirror unless the housing is broken.

Please rate this answer. Thank you.

Apr 07, 2010 | 2003 Chevrolet Silverado 2500HD

1 Answer

What parts do i need for a broken drivers side mirror


I believe you can't get the internal parts of the mirror head. you can only buy a new mirror (just the glass) or an entire mirror head assembly.
check out...
www.burcoinc.com
www.directauto.com
hope this helps

Mar 04, 2010 | 2007 Chevrolet Tahoe

1 Answer

2002 Mountaineer. How do you change the light bulb at the bottom of the driver side rear view mirror. Dan


SECTION 501-09: Rear View Mirrors 2002 Explorer/Mountaineer Workshop Manual REMOVAL AND INSTALLATION Exterior Mirror Glass Removal
NOTE: Exterior mirror glass is serviceable only on vehicles built after July of 2001.

NOTE: Passenger side exterior mirror shown, driver side exterior mirror similar.
All mirrors
  1. Position the glass in the full up position.
  1. Locate the notch at the bottom of the exterior mirror glass.
ed6be7c.gif
  1. Release the exterior mirror glass.
    1. Insert a long flat-bladed screwdriver in the notch.
    1. Push the screwdriver into the notch until the glass is released.
Heated mirrors
  1. Position aside the exterior mirror glass.
  1. Disconnect the electrical connectors.
All mirrors
  1. Remove the exterior mirror glass (17K707) passenger side or (17T675) driver side.
Installation
Heated mirrors
  1. Connect the electrical connectors.
All mirrors
  1. Position the exterior mirror glass on the exterior mirror motor.
  1. Place a hand against the back of the exterior mirror housing and a hand flat against the exterior mirror glass. Press the glass in place until fully seated.

Dec 26, 2009 | 2002 Mercury Mountaineer

1 Answer

I broke the glass in my side mirror on the passenger side of my 2001 Chevy Blazer. It is a heated mirror. How do I replace the mirror or where can I get instructions on how to replace the mirror?


remove the broken glass with putty knife. go to a auto glass shop they can sell you a replacement heated mirror glass. the new glass is just glued to plastic housing in mirror and just plug in 2 little wires to back of glass were heat element is.hope this helps good luck.

Oct 20, 2009 | 2001 Chevrolet Blazer

3 Answers

Need to replace the passenger side mirror,glass only. does anybody know if the plastic backing plate the mirror is attached to pops out of the holder? If it does, it would make it easier to fit the new...


Just replaced the mirror glass myself. Don't have all the answers but can tell you this much.

The passenger side mirror on my 2004 Odyssey was hit by a projectile which caromed off the upper door frame. Left standing was a functional mirror base (motor driven part which has four, short, horizontally mounted rods) still attached to the mirror shroud and a separate assembly of the mirror glass and plastic mount.

I purchased the mirror glass alone online from a Honda dealer, removed the old mirror glass from the mount, and mounted the new mirror to the mount. To do this, look at the tabs which hold the mirror to the mount, and slide the mirror across the mount in the obvious direction. It will take some force. I had the benefit of having the mount/mirror glass blown out of the mirror shroud so it wasn't too difficult. If the broken mirror is still mounted to the mount and inside the shroud, push the bottom of the mirror inward so the top edge of the mirror can clear the top of the shroud. Then pull up on the mirror glass to slide it off the mount. This will take some force but fortunately, the mirror glass is already broken so you don't have to be gentle. Wear gloves or protect you hands while doing this.

Reverse the process for install the new mirror glass.

Now for my key tip. I had to remount the plastic mount/mirror glass assembly onto the motorized mirror base. I could see that it snapped in, with proper alignment, by pushing straight in. I applied quite a bit of force and simply could not get it to snap in place. My solution, was to put the assembly in a 200F oven for 15 minutes to heat the plastic to make it more flexible. Using paper towels to handle to avoid burns, I aligned the closures with the four, small, horizontally mounted rods, and with a moderate amount of force, the assembly snapped into place.

Hope this makes sense. I believe most people will only have broken mirror glass and not have the plastic mount with mirror glass come off the motorized base as I did.

Apr 19, 2009 | 2004 Honda Odyssey

1 Answer

Mirror glass replacement on drivers side


i don't have aviator. here's explorer, should be the same.

You will see a small rectangle where the screwdriver goes in. You are pryingtowards glass. The retention is about a 3 inch rectangle that has a lip around it that snaps onto a rectangle on the mirror body.

SECTION 501-09: Rear View Mirrors 2002 Explorer/Mountaineer Workshop Manual
REMOVAL AND INSTALLATION Exterior Mirror Glass Removal
NOTE: Exterior mirror glass is serviceable only on vehicles built after July of 2001.
NOTE: Passenger side exterior mirror shown, driver side exterior mirror similar.
All mirrors
  1. Position the glass in the full up position.
  1. Locate the notch at the bottom of the exterior mirror glass.
  1. Release the exterior mirror glass.
    1. Insert a long flat-bladed screwdriver in the notch.
    1. Push the screwdriver into the notch until the glass is released. (and pull screwdriver towards glass)
Heated mirrors
  1. Position aside the exterior mirror glass.
  1. Disconnect the electrical connectors.
All mirrors
  1. Remove the exterior mirror glass (17K707) passenger side or (17T675) driver side.
Installation
Heated mirrors
  1. Connect the electrical connectors.
All mirrors
  1. Position the exterior mirror glass on the exterior mirror motor.
  1. Place a hand against the back of the exterior mirror housing and a hand flat against the exterior mirror glass. Press the glass in place until fully seated.

Apr 18, 2009 | 2003 Lincoln Aviator

1 Answer

Replacing the mirror with out removing the whole mirror 97 jeep


most mirror glass pops out it has plastic clips on back of glass. first practice on broken one take a flat head screw driver and use rag to protect paint pry around glass to release but be gentle at the same time hope this helps u

Apr 03, 2009 | 1997 Jeep Grand Cherokee

1 Answer

Driver side side mirror is broken. How to replace it?


if you can get a flat mirror cut to fit and stick it on with araldite

Dec 25, 2008 | 1995 Suzuki Sidekick

2 Answers

How do you remove just glass from drivers side mirror?


I don't know your vehicle. However, a few months ago one of the side mirrors was broken on our pickup truck (a Chevy Silverado). We had the glass shop put in the new mirror and they just glued the new mirror on top of the broken one.

Nov 12, 2008 | 2006 Subaru Forester

Not finding what you are looking for?
2007 Chevrolet Tahoe Logo

561 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...