Question about 2002 Chevrolet Malibu

1 Answer

Malibu chevy Hi, I have a 2002 malibu chevy and the blower fans both 1 and 2 are not working but 3 and 4 are. What is the problem and how do I fix it?

Posted by on

  • inderjits Nov 04, 2008

    Thank you!

  • elecpoodle Jan 18, 2009

    I ignored this problem on my 2002 malibu because I figured that 4 and 5 were enough to get by, and the entire thing just stopped working in the middle of a brutal midwestern winter. No heat or defrost, so make sure you get it fixed because apparently it is an escalating problem. I'll let you know how it got fixed tomorrow.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem with my 2002 malibu and my mechanic told me it is a burnt resistor. I am not sure how hard it is to change and I am assuming it is a resistor on the fan.

Posted on Nov 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace blower motor system pack on 2001 chevy malibu


first, remove the lower right dash insulator panel from below glove box. slide bcm aside for access to blower motor.(slide to right). remove 3 screws from blower housing, pull blower motor and fan straight down. if putting in a new motor, use cage from old blower. the resistor for fan speeds is located beside motor. good-luck!!

Jul 29, 2010 | 2001 Chevrolet Malibu

1 Answer

2003 chev malibu blower fan not working in position #1,#2 ,#3.Works fine on #4,#5 Help please


its the heater fan resistor thats causing it. it has coils for different fan speeds, if a coil burns out or breaks. then you will loose that fan speed. to replace resistor, remove glove box to give ya more room so you dont have to stand on your head!! remove insulating panel under glove box. loosen and slide ecm to the side. now you can see heater blower fan, resistor is beside it, just remove wires , take out the hold down screws. and thats it!

Jul 26, 2010 | 2002 Ford Taurus

1 Answer

Fan motor on a 2000 Chevy Malibu only works on 3-5 and not on 1 & 2. How to fix?


Its the blower motor resistors or the switch itself.
You need shop manual. Then remove the switch and jump certain terminals with a jumper wire to see if fan runs at certain speeds. If fan runs at all speeds when jumped then the switch is your problem . if it runs at the speeds you described in your write up then its the resistors.

Jun 04, 2010 | 2000 Chevrolet Malibu

1 Answer

Whats the firing order for a 2002 Chevy Malibu


For the 2002 Chevy Malibu 3.1L V6:

Firing Order:
1-2-3-4-5-6

Cylinders:
_______________
|....1.....3......5....|
_______________
|....2.....4......6....|

Ignition Coil Connections:

.|.5..2.|..|.3..6.|..|.4..1.|

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Apr 11, 2010 | 2002 Chevrolet Malibu

2 Answers

ON A 2001 CHEVY MALIBU THE BLOWER FAN ONLY WORKS ON SPEEDS 4,5 .... 1,2,3 DONT WORK, FUSES ARE FINE


The blower fan uses a multi segment resister to control the fan speed, it is generally mounted just under the blower in the ducting. The reason 1,2 and 3 are not working is, sections of the resister is burnt out. The lower speeds are the first ones to go since they get hotter due the higher load in soaking the unused power. Resister is around $20. look for blower resister.

Nov 24, 2009 | 2001 Chevrolet Malibu

2 Answers

Heater blower is not working in 1, 2, 3 and fan


MY 2003 MALIBU AC WORK VERY COOL FOR ABOUT ONE HOUR AND THEN TURN A BIT HOT AND THEN NO AIR COME OUT WHY I HAVE CHECK THE FREON AND ITS OK .

Nov 22, 2009 | 2003 Chevrolet Malibu

1 Answer

Replaced the fan resistor on 2000 chevy malibu this summer. Worked fine but recently the blower won't work on any speed.


this could be a bad blower or the switch to blower,check at blower fan for power if no power it is most likely the switch.if there is power on all speeds then the blower is bad. check all fuses to verify.

Nov 17, 2009 | 2000 Chevrolet Malibu

1 Answer

2000 Chevy Malibu blower motor doesn't work on positions 1 & 2. Would appreciate details on how to fix or change it.


remove dash insulator from under glove box. then move bcm to one side, fan resistor is beside the fan blower motor. the resistor will keep fan speeds from working. remove wiring and screws from resistor then take it out.

Sep 08, 2009 | 2000 Chevrolet Malibu

2 Answers

Blower motor or resistor?


I had a truck about the same year with the same problem, it was the wiring harness, but id check the resistor and the fan first before replacing anythings,

May 20, 2009 | 2002 Chevrolet Silverado 1500

1 Answer

Fan won't blow on levels 1, 2, and 3 but will on 4 and 5


you need a blower motor relay under the pass side of dash

Mar 09, 2009 | 2002 Chevrolet Malibu

Not finding what you are looking for?
2002 Chevrolet Malibu Logo

435 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...