Question about 1995 Volvo 960

1 Answer

Timing Someone, another shop, installed a head on a 95 volvo 960 but didn't set the timing. unfortunately, he didn't mark the cam gears either. None of us can figure this out, and I have two of the best mechanics I've ever met working on this thing. Please can someone help?

Posted by on

  • lurogomez Dec 12, 2008

    Hi I have the similar problem but the only thing that I do not remember is how the camshaft aligment goes at the rear, becouse If you know the cut out is not at half of the circule is off center, I do not know If the big half go to the top or bottom.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi,
The 3L 24V straight 6 engine has timing marks on the crankshaft pulley & on the camshaft pulleys. The crankshaft pulley aligns with a mark on the front of the block, the camshafts align with two marks on the plastic cover on the top. The ignition timing, the fuel/air mixture & the valve timing are not adjustable. The 3L engine is known as an "Interference" engine, in other words, if the cam belt breaks or is not set up correctly, the pistons 'meet' the valves, with dire consequences!!!!!

Posted on Dec 31, 2008

  • George A. Sloan Apr 21, 2013

    Hi Volvo760ma! I would find it easy to line up these marks but what do you do when there are NO MARKS?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to adjust cam shaft mark to cam gear


Need help with what Thanks Viper

Sep 14, 2008 | 1996 Volvo 960

1 Answer

Finding out how to find lost cam timing mark on a 1997 volvo 960


you are in a bit of a bind. Turning the engine over will result in bent valves so do not touch the crank shaft. you have to loose off all the rockers/ cam followers even to the point of removing the cam shaft. having done that remove no1 cylinder spark plug and by the use of a thin piece of wire turn the crank until the piston reaches top dead center. find this by rocking the crank back and forward until the piston dose'n move up or down check for the crank timing mark next replace the cam shaft and position the cam lobes for no1 piston in such a position that the inlet and exhaust valves move slightly up or down when the cam is moved slightly left or right. this is called valve over lap and with the piston on top dead center means that you now have valve timing for the engine. Cam timing marks can be dot on gear to shiny link on chain or if using a belt a dot on tooth lineing up with mould mark or join on head before starting up do a compression check to prove that there are no bent valves. if you are not mechanically minded enough to attempt the valve timing method it may be cheaper in the long term to let a qualified person do the job

Jan 05, 2013 | 1997 Volvo 960

2 Answers

I remove the gears from camshafts and didnt mark it


There should be a timing notch, dot, line, or even a different tooth on the gear somewhere to match them up.

Aug 28, 2011 | 2001 Volvo S40

1 Answer

How do you line up the cam gear to the camshaft on a 1996 volvo 960


just align the cam and crank marks with the marks on the covers. the timing marks WILL NOT ALIGN with the number one piston on TDC. just align the marks and the car will run ok. that's the correct way to do it.

Aug 22, 2011 | 1996 Volvo 960

1 Answer

I need cam timing settings for a volvo s40 2006


The timing marks on the cam gears align with the timing marks in the rear timing cover. The timing mark on the crank gear aligns with the timing mark on the oil pump assembly.
The tensioner is set by rotating the tensioner clockwise until the holes in the tabs on the left side of the tensioner are aligned, then tighten the center bolt.

Dec 24, 2010 | 2006 Volvo S40

1 Answer

While changing belt on volvo 960 1992 moved the camshafts how to sincronize agaein


First, your belt should have marks on it. they line up to the marks on the cam and the mark on the crank. If you don't have marks, check the old belt. If it has marks, transfer them to the new one. They are important and make the job 10 times easier. Your crank should be on tdc, on it's mark, and your cams also, on their marks. Once there, the cams can be clamped so they don't spring. If you have to move the engine, pull some spark plugs to take off the compression. Turn it over with a big socket on the crank shaft. Don't forget the pistons will hit the valves if they are not moving with the crank, so do the cams first, to get them out of the way, they only spring a little, 1/4 turn at the most. Get it lined up, get the belt lined up, pull the pin on the tensioner, you should be all set. Hope this helps.

Apr 15, 2010 | 1992 Volvo 960

1 Answer

I am wanting to change the cam belt on my volvo 960. straight six 3litre 24valve. The problem is I cannot find the 3 reference marks (1 on the crankshaft and the 1 on each camshaft pulley).


Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1994 Volvo 960. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1994/make/volvo/model/960/1994_volvo_960_timing_belt_diagram_marks.htm

Mar 21, 2010 | 1994 Volvo 960

4 Answers

1992 Volvo 960 Broken timing belt - need to locate alignment marks for crankshaft and camshaft and associated reference marks for TDC or other position. Car was cranked AFTER belt broke - Crankshaft Is...


IF U BROKE THIS BELT WHILE DRIVING U HAVE BENT THE VALVES IN THE ENGINE, THIS IS WHAT IS CALLED AN INTERFERENCE DESIGN ENGINE, THAT MEANS WHEN THE TIMING BELT BREAKS THE PISTONS HIT THE ENGINES VALVES

Nov 11, 2009 | 1992 Volvo 960

2 Answers

How do you put in a new cam position sensor in a volvo 960?


That's because it's in the distributor. He's replacing the whole thing. A good idea if you never took one apart.

Jul 14, 2009 | 1995 Volvo 960

Not finding what you are looking for?
1995 Volvo 960 Logo

452 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...