Question about 1993 Eagle Talon

1 Answer

1993 Eagle Talon

Whines and grinds when putting in 1st gear and hard to put in reverse. After driving it for a while it stops this problem and shifts very easily through all gears. What could be my problem?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 55 Answers

This may be caused by incorrect fluid in the transaxle or incorrect fluid level.

My guess would be fluid level- as the fluid warms up and expands, the level actually increases slightly and the fluid is slightly thinner which would be easier to be "flung" around inside the transaxle case.

Hope this is helpful!!

ASE Master Technician with L1 and X1 Certifications; Nissan Scope Technician; Chrysler Level 3 Silver Technician- 12+ years experience.

Posted on Nov 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont go into any gears


Have you had someone watch the shift levers on the transmission to see if they are moving when you are inside the car ?
You should be able to put the transmission into a gear from under the hood.
Could be a problem with the clutch.

Mar 06, 2013 | 1995 Eagle Talon

1 Answer

Grinds going into 3rd if pushed hard


Standard Shift Trans?

Any gear shifting issues such as
grinding are internal trans issues

There should be no need to push hard

In order to fix-- the trans has to come out &
apart to find the worn parts & replace them

Jan 25, 2013 | 1997 Eagle Talon

1 Answer

1995 eagle talon manual transmission i'm able to put my clutch down and shift gears, but car wont accelerate


Something is broken, that is for sure, pull the transmission out and first look at the clutch plate.

Jul 08, 2012 | 1995 Eagle Talon

1 Answer

1996 eagle talon has only first gear and reverse


Does the speedometer work? Does it shift hard when you put it in gear.

Jul 25, 2010 | 1996 Eagle Talon

1 Answer

Eagle talon will not shift.


A transmission usually does this if it can't read the turbine speed. Some cars use the VSS (vehicle speed sensor) for shifting and others use the TSS (turbine speed sensor) for shifting.

The TSS has a single bolt and a 4-wire connector. If your speedometer works, then I would suspect the TSS is bad. It'll be found in the transmission. Just follow the wires you see running to the tranmission and look for the 4-wire sensor with a single bolt.

Mar 05, 2010 | 1993 Eagle Talon

1 Answer

Wont go into first with out grinding or going in hard


Remove gearbox and replace the whole clutch assemberly.Problem is your thrust bearing as collapsed.Good luck.

Jul 04, 2009 | 1997 Hyundai Accent

2 Answers

Can't shift


You probably burnt the clutch up.
A good indicator is hard to get into 1st with out grinding as well as reverse, and over all poor ability to shift in any gear.

air in the slave cylinder is more then likely not your problem.
Its pretty hard to do.

May 23, 2009 | 2006 Ford Mustang

1 Answer

Grinding when in reverse and tries bogging down at lights


stop shifting so hard. your reverse gear is the same exact gear as your first, so if you shift hard and grind that gear a little then reverse will be harder to get into. you probably need your transmission rebuilt the harder your engine has to work the more its going to bogg down

May 14, 2009 | 1987 Ford Ranger

2 Answers

'91 eagle talon tsi awd...gears grind


Sounds like you need a clutch.

Jan 17, 2009 | 1991 Eagle Talon

Not finding what you are looking for?
1993 Eagle Talon Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Stewart Dibbs

Level 2 Expert

267 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...