Question about Mazda B-Series

1 Answer

No brake lights - have changed fuse and globes

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 426 Answers

Follow your brake pedal arm under the dash until you find the little black switch with two wires on it, that is activated by moving the arm in and out.It may be a simple adjustment or replacement of that switch.If pushing the switch button doesnt make the tail lights work unplug and join the two wires to confirm that the switch is faulty.If joining the two wires doesnt make the tail lights work check that you have power at one of the wires,if no power you will need to find out why but im sure its just the switch needs adjusting.Good luck.

Posted on Nov 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BF wagon eye level brake light is not working have tested globe and globe is working. Also reverse lights not working


If the other brake lights work, probably broken wire. Eye level meaning Suv hatch? If so, the wires tend to break at the rubber boot from the hatch to the body. The reverse lights run threw the neutral safety switch on the transmission. Could be a broken wire, most times it is the switch.

Aug 06, 2016 | Cars & Trucks

1 Answer

No taillights park or dash lights


check park/tail fuse regarding dash ,park ,tail problem .brake light on passenger side is probably the brake globe needs replacing .Turn signals on passenger side could be globes or switch,check globes first ,if globes and fuse are ok ,may well be the switch especially if park switch and turn signals are on the same switch lever/stalk

Jan 15, 2014 | 1990 Buick Century

1 Answer

Why wont the brake lights shine when pressing the brake pedal but the tail lights are working on the same bulb


test the brake light switch located at the brake pedal, disconect the switch & bridge the wires, turn ignition on if you have lights its a faulty switch (very common on ford falcons) if not check you have power at that plug, if power check the globes cause you could have blown globes as they are twin filiment globes (1 globe but 2 lights tail & brake) & the brake filiments might be blown.

Jun 26, 2012 | Ford Expedition Cars & Trucks

1 Answer

1999 ford focus third brake light not working


change the globe and clean the connection and check the fuses

Jun 13, 2012 | Cars & Trucks

1 Answer

My brakes light wont work on my 93 geo metro what should i do


Hi, you should check all the fuses in the vehicle. If all the fuses are OK, check the brake light globes. If all the globes are fine, look for power on the brake light switch and make sure that the power goes through make sure that you get power on the contact points of the globes. If there is no power you should trace the wires to where wires are broken.

Nov 09, 2009 | 1993 Geo Metro

1 Answer

2001 Corolla S only brake lights in back do not work window does


change the globes they may look alright but probably wont be or if you have a circit tester check to see if power getting to globe connecter but i reckon your globes

Jul 27, 2009 | 2001 Toyota Corolla

1 Answer

2006 Mazda 3 Hatch brake lights not working


ur breask switch may be not working or wire is loose....also check ur globes,,,,some globes carry 2 functions.....normal light and brake light,,,,,so i assume you brake light globes need checking

Mar 07, 2009 | 2004 Mazda 3

1 Answer

1998 mazda protoge brake lights do not work checked fuse...ok.... changed brake light switch but still no brake light... any suggestions?


stupid question but have you checked that all the globes arnt blown.
also have you adjusted the stop light switch properly.

a good test to to is check your globes replace them if you are not shore of them then un plug the stop light switch and earth out the two pins in the plug then check if the light come on.
if they do you may still have a faulty new switch our it might need adjusting

Dec 05, 2008 | 1998 Mazda 626

1 Answer

Left Brake light Globe fuses tazz 2000(New Shape)


Make sure you have the appropriate light bulb and fuse. Otherwise it has to be an intermittant short.

Oct 27, 2008 | 2000 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

478 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...