Question about 2008 Hyundai Accent

1 Answer

Timing belt on huyndai accent 2001

I am replacing my timing belt, and i need to know the markings for it on a 2001 hyundai accent

Posted by on

  • F-15 Dec 01, 2008

    My 2001 Hyundai timing belt broke. How do I align the timing marks? I dont think it did any damage to the valves I was only at idle speed and parked when it broke. I would apprieciate any help I can get.



    thank you

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 1,757 Answers

My sincere apologies for the severly delayed response.
I am personally going back to answer your unanswered questions. I have only been on this site for the past 4-months as a free contributor.

I do not know if you still need this information, however I am answering it - in case you still do.

Click on the following direct Link. It has several Diagrams for your 2001 Hyundai Accent Timing Belt and Marks.


Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2001/make/hyundai/model/accent/2001_hyundai_accent_timing_belt_diagram_marks.htm

Posted on Mar 19, 2010

  • tonycgriffin Aug 17, 2011

    timing belt sequence- align hole on camshaft pully at tdc, this puts the timing mark to point to the front of yhe cylinder head; then turn the crankshaft pully mark to a v-shape mark on the block at about the one- oçlock position

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing marks position for replacing belt


Click on the following direct, free Link. It has the Timing Belt + Mark Diagrams for your 1995 Hyundai Accent 1.5L SOHC In-Line 4-Cylinder Alpha Engine. Is also has additional - very helpful Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1995/make/hyundai/model/accent/1995_hyundai_accent_timing_belt_diagram_marks.htm

Apr 25, 2010 | Hyundai Motor 1995 Accent

1 Answer

Timing belt


Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 2001 Hyundai Accent. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2001/make/hyundai/model/accent/2001_hyundai_accent_timing_belt_diagram_marks.htm

Mar 31, 2010 | 2001 Hyundai Accent

2 Answers

Need set timing.


2005 Hyundai Accent. I replaced the timing belt, I get sparks, but won't start? Thanks.

Mar 24, 2010 | 2005 Hyundai Accent

1 Answer

Need to know timing marks when replacing timing belt on 1.6L hyundai


turn engine to TDC No1 cylinder at this point the cam cog has a hole drilling which should be at 12 o/clock position and alignes with a V notch on the cyl head as you look thro the cam drill/hole and when crank pully is at TDC the cog has a marked tooth which should align with mark on engine approx 12-30 pm position these marks are all clear to see and belt change takes around TWO AND HALF HOURS to do

Dec 18, 2009 | 2001 Hyundai Accent

2 Answers

Timing belt snapped


hi from uk the cambelt timing marks for accent 1.3/1.5 petrol are as follows= the cam cog has a hole drilling between the outer toothed and the central securing bolt this hole at TDC number 1 cyl is at top central and lines up with a V cut in the cyl head at rear of cog ? the crank cog at TDC number 1 cyl is a pop mark on both the cog and on thefront face of engine quite noticable ! these line up and are at approx 12 -30 pm when viewed fit new belt from crankcog in anticlockwise ie crank then cam then tensioner HOWEVER! if you are considering just replacing belt and tensioner ? be warned this engine is an interferance engine that is to say if belt fails whilst driving there may/will most probably be damage to the valves (bent) due to contact with pistons so would advise caution and suggest compression test all cyls after fitting new belt and tensioner and before rebuild completely once valves have bent they will not contact pistons again but you will have serious missfire/s and probably back fire up inlet manifold coupled with failing to start if engine is high milage ? consider removal of cyl head and check? de coke and replace damaged or best all valves then engine will have improved performance and more milesin future hope this helps

Nov 28, 2009 | 2001 Hyundai Accent

1 Answer

HOW TO SET TIMING ON A 2001 HUYNDAI ACCENT


Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Sep 11, 2009 | 2001 Hyundai Accent

1 Answer

Instalation of timing belt on a 2001 hyundia accent


dear friend-on your vehicle cam mark should be at the top,there is a 6mm hole which must line up with a notch on the head.crank must be on TDC and the mark will be slightly to your right.

Jun 25, 2009 | 2001 Hyundai Accent

1 Answer

Need instructions to change timing belt and water pump on 2005 huyndai accent


It would be hard to explain over the computer.
The best and easiest way to do this is get a Chilton manual for the auto-parts store. The book runs about $20.
It will show you step by step on how to do it. It's the do-it-yourself bible for your car.
This way you have all the pictures, diagrams and other info you need. It's great research material.

Apr 28, 2009 | Hyundai Accent Cars & Trucks

2 Answers

2002 Hyundai Accent Problem


first thing i need to know is did the timing belt break?
second is are you sure you aligned the timing marks and after the belt tensioner was tight you rechecked to make sure the timing stayed where you had it.
next step would be a compression check to if a valve was bent whenchanging the belt
i have seen this happen and this engine is an interferance engine.
later paul

Sep 28, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...