Question about 1990 Dodge Dakota

Open Question

Clock Setting for 1997 Dodge Intrepid

Help, I'm not sure how to change the clock setting on my 1997 Dodge Intrepid. The radio/cassette is factory installed.

Thank you.

Posted by on

4 Suggested Answers

  • 1 Answer

SOURCE: clock radio 1990 doge dakota

you will need to use a pen or something small enough to insert in the two holes located by the clock to set the hour and minute.

Posted on Sep 23, 2008

  • 24 Answers

SOURCE: i need a wiring diagram for the factory stereo on

go to your local junk yard and get you another wiring harness

Posted on Mar 13, 2010

  • 3092 Answers

SOURCE: 1997 Dodge Stratus- When headlights on other dash lights go off.

Check cluster fuse, instrument panel fuse.

Posted on Jul 12, 2010

SOURCE: I don't know how to

Push one of the two bottom right buttons,then I believe you clock it up or down, with the top right channel select button,then the set button

Posted on Nov 08, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Does the clock need to be reset after changing the car's battery in a 1997 Buick Park Avenue, and if so how do you set it?

If it is the factory radio you need to set the clock on then here is the information:
Setting the Clock Press and hold HRS until the correct hour appears. Press and hold MIN until the correct minute appears. You may set the clock with the ignition off if you press RECALL first and follow the same procedure described above

This was taken from the owners manual, which I was able to locate online here:

Jan 27, 2017 | 1997 Buick Park Avenue

1 Answer

The CD and cassette players do not work.

pull the radio assembly out check to make sure that all your wiring is connected to the radio securly

Feb 10, 2013 | 2006 Dodge Grand Caravan

1 Answer

How to set clock i 97 stratus

  • 1Crank the engine or turn the key to the "Acc" notch to turn on the electronics.
  • 2Hold the "Time" button on the radio until the display begins flashing.
  • 3Turn the "Tune" knob right or left to set the hour display. When the appropriate hour is displayed, press the "Tune" knob to confirm.
  • 4Turn the "Tune" knob to adjust the minute display. When you are finished, press the "Tune" knob to save the clock setting.
  • U-Connect Multimedia Radio
    • 5Press the "Power" button on the multimedia system.
    • 6Touch the screen where the clock is displayed to bring up the clock setting menu.
    • 7Touch the hour display. Press the arrows on the screen to adjust the hour display.
    • 8Touch the minute display. Press the arrows to adjust the minute display. Press the button at the bottom labeled "Save."

  • May 22, 2012 | 1997 Dodge Stratus

    1 Answer

    I don't know how to set the clock on my '92 dodge dakota. it is a factory radio/cassette stereo.

    Push one of the two bottom right buttons,then I believe you clock it up or down, with the top right channel select button,then the set button

    Nov 08, 2010 | Dodge Dakota Cars & Trucks

    1 Answer

    How do I set the clock on the cd/cassette radio on 1999 Ford E450

    Push clock button down and use seek and tune to adjust time

    Jul 14, 2010 | 2001 Ford Super Duty F 450

    2 Answers

    How to change clock on radio of 1997 Ford E-350 Clubwagon

    For the clock: Turn the radio on Push and hold in the clock button And push the seek button (left) for hours And push the seek button (right) for minutes There is no AM or PM
    For the radio: Find a radio station on the radio Push one of the selector buttons on the radio and hold it down for about 10 seconds and release That's all it takes You should have 5 buttons for AM And 5 buttons for FM-1 And 5 buttons for FM-2

    Good luck

    Dec 14, 2009 | 1997 Ford F350 Crew Cab

    1 Answer

    How do i set the clock on a 2004 ford explorer

    Page 20 of your owner's manual for PREMIUM AM/FM STEREO/CASSETTE/SINGLE CD:
    RDS: (Radio Data System): Press RDS to access the clock mode.
    Setting the clock: Press RDS until SELECT HOUR or SELECT MINS is displayed. Press SEL to increase (◄) or decrease (►). Press RDS again to disengage the clock mode.


    Setting the clock: Press MENU until SELECT HOUR or SELECT MINS is displayed. Use SEL to manually increase (▲) or decrease (▼) the hours/minutes. Press MENU again to disengage clock mode.

    Nov 18, 2009 | 2006 Ford Explorer

    1 Answer

    Easy one...93 Lincoln...need to know how to set the clock on the radio/cassette as well as the stations. Thanks in advance!

    assuming this is the digital clock, you hit the clock button on the dash, followed by the reset button followed by the clock button. at this point, you should be able to hit the clock button to advance numbers, and the reset button to change the numbers you are setting. if its the analog clock, pull on the knob and turn it

    Nov 01, 2009 | 1993 Lincoln Town Car

    1 Answer

    Time clock change on dodge ram navigation radio

    Press "NAV" to go to the main navigation menu.

    Scroll down and select "System Settings"

    Scroll down and select "Clock Setting"

    Make sure "Show GPS Clock" is selected with a red check in the box.

    I had to switch "Daylight Savings" from "ON" to "OFF" in order to bring the time back an hour. I assume that I'll just have to switch it back to "ON" in the Spring in order to move the time forward and hour.

    Nov 06, 2008 | 2006 Dodge Ram 1500

    Not finding what you are looking for?
    1990 Dodge Dakota Logo

    Related Topics:

    115 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts


    Level 3 Expert

    71338 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22059 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7018 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides