Question about 1997 Geo Prizm

2 Answers

Turn signal 1997 geo prizm turn lights and hazard lights are not working. fuses, relay, light bulbs ok.

Posted by on

  • Brian032472
    Brian032472 May 11, 2010

    do they light but not flash?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The wire under the hazard button has probably come loose. Most GMC vehicles this year range were made with a closed circuit wiring between the flashers, hazard lights, and rear defrost. Over time the wiring under the hazard button has been known to loosen. This causes the whole system to lose function. If pop out the hazard button on you center console you should be able to tighten that wire back on and the system should work again.
The same thing happened to me when I put in a new radio. I bumped the wires off and my blinkers, rear defrost, and hazard lights went out. I replaced the fuses and the flasher relay but nothing. Then I asked a mechanic and he told me what I just told you.
Hope it helps!

Posted on Nov 06, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 150 Answers

Well you haven't responded to my clarification request so I will assume they do light but don't flash. If this is the case the flasher unit located usually under the drivers side dash is probably the issue.

Posted on Nov 19, 2008

  • Leslie Mondrick Sep 16, 2011

    They do not light up of flash. Changed the signal light switch, checked a relay and fuse. Is there another relay of fuse I am not seeing.

  • Leslie Mondrick Sep 22, 2011

    The flasher unit is not the problem. No power. Where can I get a wiring diagram so the wires can be chased and tested?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

97 geo Prizm. My tail light fuse keeps getting blown. I know it might be because of the marker lights cause one of them fell out and then the fuse got blown for the first time. How do I check and fix the...


Replacing the wiring is simple IF all upi are replacing is the socket. If you haven't already, check the socket for rust, corrosion, etc. Replace if needed. Check and replace the fuse as well as the turn indicator relay (this is under the dash). To find it, turn on your blinker (left or right) and feel for it (you will feel it clicking-assuming its working ay all, it should be). These get weak, and don't make a "clean" connection and can cause shorts at either end of the vehicle in respect to blinkers, hazards etc. Also, make sure that all other bulbs and sockets are in good repair\condition. If the problem persists, than the problem may be a break in the wiring, but not likely. Check all other fuses as well whole your checking the blinker\tail light fuses(s) and relays.

Dec 11, 2014 | 1997 Geo Prizm

1 Answer

Car wont start flashers wont stop flashing. 97 GEO


double anon post.
backup one post and read.
left or right lights? if both that is HAZARDS stuck on.
cycle the hazard switch , bingo?????
there are 2 fuse, Turn, and HAZ, one must kill the blinking
which one? PULLED.?
you double post and ANON to boot., so here i ask again,.
it dont crank
or cranks ok fast but will not start.????




3ac9d2c7-ec3e-476d-91d3-96f244434387.jpg

Sep 23, 2014 | 1997 Geo Prizm

2 Answers

!997 Ford Thuderbird brake lights and hazards do not work


Lets start at the beginning.
The turn signals and brake lights use different fuses but both go thru the turn signal switch and use the same bulbs.
Have you checked the fuses for each circuit and does each switch have power in and out ?

Feb 03, 2013 | 1997 Ford Thunderbird LX

1 Answer

Turn signal not working, replaced fuse in fuse box underdash and still nothing


Pull the panel with the hazard lights button, and make sure that connection is made. The way it's wired up if the hazard button isn't connected nothing will work. I had the same problem

Dec 16, 2012 | 1996 Geo Prizm

1 Answer

Cant find location of flasher relay on a 1995 geo prizm


The flasher unit located usually under the drivers side dash is probably the issue if the turn signal or hazard lights wont work.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day

Feb 13, 2012 | 1995 Geo Prizm

3 Answers

1990 geo prizm brake lights only work when car is off


in front were the brake is try to c if there is a guage like a small little wire

Nov 16, 2011 | 1990 Geo Prizm

1 Answer

I have 1993 geo prizm that the turn lights won't work, but the hazards and stop light do.


Inside the turning light bulb there is total of TWO electrical lighting wires (filaments).
One of the two wire inside the bulb is broken.
You need to replace the bulb.

Jan 31, 2011 | Geo Prizm Cars & Trucks

3 Answers

1993 Geo Prizm turn signals dont work. Hazard lights DO work. Checked fuse several times & its ok. Any suggestions?


You have a bad turn signal switch if the hazards work and the turn signals do not. It has nothing to do with the fuse or the flasher unit. Your switch is bad or you have a bad connection some where.

Feb 15, 2010 | Geo Prizm Cars & Trucks

2 Answers

Turn signal lights and hazard on my 95 geo prizm don't work


look for ur fuse box the fuses are in therehave manual info should tell you where fuse is

Feb 07, 2010 | 1995 Geo Prizm

Not finding what you are looking for?
1997 Geo Prizm Logo

619 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...