Question about 2002 Volvo S80

Open Question

Replacement of timing belt on 2002 Volvo S80

Trying to get the lower pully off the crank. Any suggestions?

Posted by on

6 Suggested Answers

alicantecoli
  • 21949 Answers

SOURCE: 1998 zx2 timing

timing mark is on flywheel for crank and on the rear end of the cams under the rocker cover.be carefull with this as the pulleys do not have keyways and can come loose resulting in smashed valves and piston.make sure retaining bols have locktite or better still araldite on the threads and use a impact gun on them.fairly easy job to do though,make sure you remove tensioner though and remove the dust cover and give a little drop of oil and some new grease then push seal cover back on ,saves the cost of a new bearing as these are not cheap.

Posted on Nov 09, 2008

  • 1 Answer

SOURCE: timing belt replacement on 2001 volvo v 40

Check this, hope it helps

http://volvospeed.com/Repair/s40_timing_belt.html

Posted on Apr 04, 2009

  • 91 Answers

SOURCE: 1992 Volvo 740 Wagon w/o Turbo: Timing Belt Needs Replaced

It is a right hand thread and you usually need an impact gun. Take the fan out of the way, to give you more room, I have found that helps.

Posted on Apr 10, 2009

  • 2 Answers

SOURCE: 2000 volvo s80 turbo does it have a timing belt or chain and when

timing belt replacement is 168,000 km

Posted on Jun 11, 2009

  • 104 Answers

SOURCE: 1999 volvo s8 timing belt replaement

What about it??
I wouldn't try it if you don't know how, (specially if this is what is known as an interference engine). Valve timing is *very* delicate and stray pistons love to chew them up!

JOAT

Posted on Oct 16, 2009

  • 4331 Answers

SOURCE: volvo s80. engine warning light

Something has been detected by your engine management computer. The next step is to pull the error codes, with a scanner, and pursue those results.

Posted on Nov 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Break bolt lose on harmonic balancer keep spinning


Hello. If you have a impact gun it will spin off , if not you can use a pair of vise grips and a leather glove. Put the glove around the pully and pinch it with the vise grips. This will help you keep from bending or putting nicking up the pully. Then just turn the bolt until the vise grips hit the side of the housing and you should be able to break it lose.

Feb 23, 2015 | 2004 Volvo S80

1 Answer

Does a 2000 volvo s80 have a timing chain or timing belt?


It has a belt. If cracked, replace it immediately! Go to Matthews Volvo Site and look for: 99' S80 T6 Cam Seal Replacement/ Oil Leak Repair,Timing,PCV

Jul 03, 2014 | 2000 Volvo S80

1 Answer

Volvo s80 t6 after putting my serpintine belt back on when i started the car a good size of the belt ripped of and wrapped around my harmonic balncer to the timming belt and shut my car right down


Did the piece of serpentine belt actually make contact with the timing belt ? The timing belt should have been behind the timing cover.
And does the engine crank normally ? Normal compression ?

Jan 24, 2014 | 1999 Volvo S80

1 Answer

My 2002 volvo s80 has to be jumped started every time i turn off keeps running after jumped


Check charging voltage when running. It should be around 14 volts at the battery terminals. If not, even when revving, then change the alternator.

Then check the battery voltage at rest, a few hours after resting that is. The voltage shouldn't be lower than around 12.5.
You can double check battery condition by turning on the vehicle lights and cranking. If the lights dim significantly, then you have a dead battery and you will need to replace it.

Nov 12, 2012 | 2002 Volvo S80

1 Answer

How to fit a cambelt on a volvo s60 t5


remove drivers wheel then plastic wheel arch then put jack under engine and remove the engine mount then take off fan belt and timing belt cover mark your two top cam pullys and the crank pully then remove your belt and tensioner put new belt and tensioner on making sure all your marks line up then put on the crank pully and turn engine over twice by hand using a ratchett on the crank pully bolt if it turns over and your marks still line up put it all back together and start the car

Mar 14, 2010 | 2002 Volvo S60

2 Answers

1999 volvo s8 timing belt replaement


What about it??
I wouldn't try it if you don't know how, (specially if this is what is known as an interference engine). Valve timing is *very* delicate and stray pistons love to chew them up!

JOAT

Oct 16, 2009 | 1999 Volvo S80

1 Answer

2001 S80 Volvo left/right lower control arms cracks


You can replace just the bushings!, and the job should be MUCH less than that. If your in the Maine area, please give me an email at chris@expertvolvo.com

Jul 20, 2009 | 2000 Volvo S80

2 Answers

99 Volvo S80 water pump replacement


if this helps.. I had the 1998 model S70. the water pump was driven by the timing belt. you had to take the timing belt off just to replace the water pump. it was just a simple bolt on replacement. the only difficult issue is resetting the hydraulic tensioner on the timing belt. the hydraulic tensioner has to be completely taken off and compressed VERY SLOWLY in a vise. then insert a very hard drill bit or (special volvo tool) into a keeper hole, reinstall hydraulic tensioner onto car and reinstall timing belt.very quickly remove drill bit from keeper hole in tensioner and the tensioner snaps back out to put tension on belt. and you are done.

Jun 15, 2009 | 1999 Volvo S80

1 Answer

Volvo s80


If its just a regular drive belt its impossible for this belt to "kick back" and bend a vale. However if this was a timing belt its quite possible to bend valves if it breaks. You problem could be a crank sensor that may have gotten damaged when this belt broke. If the crank sensor is damaged it won't send a reference signal to to computer therefore the vehicle would not have a spark to start. Godd Luck

Dec 09, 2008 | 1999 Volvo S80

1 Answer

Volvo s80 not cranking


Check and make sure the timing belt has not slipped. It's possible that the broken drive belt got under the timing belt and made it skip. If this happened, you are in for an expensive repair!

Dec 09, 2008 | 1999 Volvo S80

Not finding what you are looking for?
2002 Volvo S80 Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Mark Jones

Level 2 Expert

76 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...