Question about 1991 Toyota Pickup

3 Answers

1991 toyota pickup lost fuse panel cover

My fuse panel cover has been lost somehow or another over the last few years
and im trying to install a cb radio using the accessory fuse but i have no idea which fuse that is
can you help? or tell me a place to find the correct diagram for my hunk of junk?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

From the bottom with fuse 1 being closest to the door
1 - Radio 7.5A , Wiper 20A , Engine 10A , Next row up - cig lighter 15A , Gauges 10A , Ignition 7.5A , Next row up Turn 10A , Stop 10A , Tail lights 10A , Next row up Defog 15A.

However if you just want to install a CB find an ignition live under the bonnet and run it from there with an inline fuse or direct from the battery using the same. You will not flatten the battery as if the CB is off it draws no power. Another option is to piggy back the ignition live from the radio cassette !.

Posted on Jan 06, 2009

  • gadgettgirl May 14, 2011

    The rows described are up and down not across. I would say they are columns 1,2 and 3 working from the door toward the front of the truck. Column 1 bottom closest to door= (Radio), up one (wiper), top row of this column, (Engine). Column 2 bottom= (cig lighter), up one, (gauges), top row of this column, (ignition). Column 3= (turn), up one, (stop),top row of this column, (tail lights)
    Above all other fuses= (defog)

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need your email address i can send you a printout of the kick panel fuse box

Posted on Jan 06, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 150 Answers

If you still have the owners manual check the index there is always a fuse diagram in the manual. I have found they are usually more descriptive as well. A manual and fuse cover are both still available for this truck at the dealer.

Posted on Nov 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse diagram for inside fuse box on 91 toyota truck 2wheel drive


when you were installing the cigarette lighter you may have loosened a connector to these other functions so i'd retrace where i was working and try pushing together any wirng connectors you can see/reach,if still not working i'd change the indicator flasher relay ,let me know how you get on

May 08, 2014 | 1991 Toyota Pickup

1 Answer

How to remove rear panel cover


wow a CB, havent done them since 1965. (i worked at REACT)

or smokey and the bandit era,

even truckers use CELLS now.

but CB is good for hunting. (and SSB is #1 way)



better is hand held, long range, handy talkies. DSS tech. (even sold at walfart or for sure any sports stores)



The best antenna is a long whip, longer is ALWAYS better.

and mounted to the rear bumper.

Mounted there, the signals will be very strong from across top center of car. (I used to do military , field tests for signal mapping of antenna\'s) (and searching for lost folks with CB in cars, triangulation and directional loops etc, way before GPS , made folks brave, in the woods.)

rear panel cover (of what) are you inside the cab>?

where.

im and expert in tuning any real radio transmitter,

we tune for lowest SWR.





the FSM covers all this. about all panels buy a used FSM

off ebay

or try alldata.com and read the body sections.

most cars, panels inside come off after getting trim off.

door panels pop off

the key here is to remove the plastic without breaking it.

the $64,000 dollar question on all cars. a skill to learn.

I just login, and read.

but a pro, will proceed very carefully to find out which way the maker

did his craft.



no year stated, or exact model, only Pickup.

so cant look it up.

Apr 05, 2014 | Isuzu Pickup Cars & Trucks

1 Answer

Im missing the fuse block cover on the kick panel on a 1986 toyota pickup what fuses is what from left to right i got a short back to the fuel pump and I have traced the wire back to fuse panel and its...


red fuses 10 amp ,blue 15 amp 25 amp yellow and 30 amp a buff colour so check teh 25 and 30 amp fuses to find the feed ,pull the feed off the fuel pump and check for a short again

Dec 26, 2010 | 1986 Toyota Pickup 4WD

1 Answer

Where is the main fuse??


TOYOTA HAD 3 FUSE BOXES. FUSES IN THE ENGINE COMPARTMENT FUSES DRIVER SIDE KICK PANEL FUSES BEHIND GLOVE BOX.

Jun 28, 2010 | 1991 Toyota Pickup

2 Answers

Replacement bed


Id suggest craigslist.

Apr 01, 2010 | 1991 Toyota Pickup

2 Answers

Timing chain Toyota pick up 22re 1991


The 22re timing chain is a double roller and last the lifetime of the car they are bullet proof however the chain tensional is another thing altogether.

Jun 19, 2009 | 1991 Toyota Pickup

1 Answer

I need to know where the fuse panel is on my 1989 Toyota Pickup.


it should be under the hood driverside fender well behind the battery

Jan 16, 2009 | 1991 Toyota Pickup

1 Answer

1991 Toyota Pickup Leaks oil



put new cylinder head gasket cover.clean the engine,if its check the cylinder head boltes and tight.

Sep 18, 2008 | 1991 Toyota Pickup

Not finding what you are looking for?
1991 Toyota Pickup Logo

1,162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...