Question about 1998 Chrysler Sebring

2 Answers

Key stuck in ignition

Hello I have a 98 crysler sebring limited and for some odd reason the key is stuck in the ignition it has done this before but I could get the key out it started acting up about 2 or 3 days ago NOW they key will not come out and im not sure if the clip in the tranny is snapped or what the deal is

Posted by on

  • Anonymous Dec 21, 2008

    i have a 2002 sebring... mine has been doing tje same thing, i need a jump every time i need to go somewhere

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Make sure the car is in park. If it is not in park, or the car doesn't think it's in park, it will not let the key out.

Posted on Jan 04, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,605 Answers

Spay some DW40 in the key slot and wait abut 5 to 10 mins. wigger the key, and slide it out.

Posted on Nov 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My key will not come out of the ignition,I don't want it to die, and the reminder was dinging as I got out. Has anyone else had this problem with a Chrysler Sebring?


e steering wheel a little bit back and forth when turning the key to get it out. It may have partially locked. Spray a bit of WD 40 into the lock barrel. Don't use CRC as it will wash out the lube in the lock and the key will stick even more...

Feb 03, 2016 | 2004 Chrysler Sebring

1 Answer

Key stuck in ignition of my 98 Ford Aerostar van. Came out once but then got re-stuck in ignition switch.


FORD IGNITION LOCKS ARE NOTORIOUS FOR DOING THAT. IF IT WILL START TAKE IT TO A LOCK SMITH & THEY CAN CHANGE THE LOCK. I HAVE DONE THIS, IT NORMALLY TAKES JUST A FEW MINUTES

Dec 28, 2010 | Ford Aerostar Cars & Trucks

1 Answer

2005 crysler sebring 4 cyl no start p 0340 code changed camshaft position sensor still no start. key engaged engin turn over, fuel present, no start, occasionally get a small backfire. HELP!!!


Try substatutting the ignition module with a known goog one.Also have the camshaft CIRCUIT checked at the camshsft sensor plug in, for propper voltage.The code P0340 indicates a circuit malfunction not a sensor malfunction. Good luck.

Dec 07, 2010 | 2005 Chrysler Sebring Conv

2 Answers

My keys are stuck in the ignition of my 2007 sebring


The tumblers inside the key lock cylinder has jambed up causing this to happen. The only remendy is to replace the key lock cylinder

Jul 16, 2010 | 2007 Chrysler Sebring Sedan

1 Answer

I have 1996 sebring my key is stuck in the ignition


first thing to try would be to remove car from park to a gear and then put firmly back into park...... then retry,
if doin that a few times dont work, you will prob need to replace the ignition cylinder....... make sure it appears gear selector levers parts are all in their place,, visually that is

Jan 22, 2010 | 1996 Chrysler Sebring

1 Answer

2001 chrysler sebring convertable key stuck in ignition -


Is the gear shift button stuck in, if so hit the gear shift a couple of time and that should unstick the botton, allowing you to remove your key

Jul 04, 2009 | 1998 Chrysler Sebring

1 Answer

Key gets stuck in 97 chevy blazer


It sounds like your ignition switch is shot. Not the key and tumbler, but the actual switch which is down on the bottom of your steering column, and connected to your key and tumbler by a rod.

Apr 27, 2009 | 1997 Chevrolet Blazer

2 Answers

Ignition locked


try to move the steering wheel lift or right since u try to turn key . it cuold be lock

Apr 07, 2009 | 1997 Chevrolet Blazer

1 Answer

Only key locked in car


call a tow truck.... they carry kits in their vehicles to unlock the car

Robert

Please take a moment to rate this solution.. thanks

Feb 11, 2009 | 1998 Chrysler Sebring

2 Answers

Key stuck in ignition of Trailblazer.


There is a small 1/4'' oblong cover plate on the underside of the stearing column. Pop this out and there is a button you push in ( like the Crysler key relase) and this will allow you to remove the key.

Dec 22, 2008 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
1998 Chrysler Sebring Logo

Related Topics:

987 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...