Question about 2002 Dodge Ram Maxi

3 Answers

No tail lights

Hello, I have a 2002 Dodge Ram p/u 1500 2x4. I cannot get the tail lights to work, the head lights brake lights back up lights all work ! wE TOOK IT TO THE DODGE dealer and they said something about a Front control Module! And wanted 500.00 to fix it, Please, do anyone out there know a cheaper way to get it fixed? thank you and God Bless!

Posted by on

  • Anonymous Nov 22, 2008

    I HAVE NO TAIL LIGHTS,NO LICENSE PLATE LIGHTS NO FRT. MARKER LIGHTS. EVERYTHING ELSE WORKS-BRAKE,TURN SIGNAL, BACK-UP LIGHTS, 4-WAY FLASHERS,FOG LIGHTS. CHECKED ALL FUSES & RELAYS THEY ALL CHECK FINE. WHEN YOU TURN THE HEADLIGHT SWITCH THE FIRST NOTCH ITS LIKE A DEAD CIRCUIT-NOTHING. THE 2ND NOTCH HEADLIGHTS COME ON AS THEY SHOULD BUT STILL NO MARKER LIGHTS OR LICENSE PLATE LIGHT. THIS IS A 2002 DODGE QUAD CAB 4X4

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

You have a bad control module. the part number for it is 56051036af if you go to the dealer its about $238.

Posted on Nov 25, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have seen this problem on several dodge p.u.'s it is in the headlamp switch dimmer switch assembly, change it out to solve your problem.

Posted on Mar 25, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I found the problem on my Dodge Ram van.. The button for the hazard lights was bad.. I tuned on the hazard lights and only had one side, so i jiggled it and the other side came on. Then I pushed in the hazard button to turn them off and proceeded to check the brake lights, the still did not work so I again jiggled the hazard button and whaaalaaa the brake lights would flicker on and off.. I have a piece of cardboard pushing the button to the side to hold pressure on it keeping my brake light connection until I can get me a new hazzard switch.. Hope this helps..

Posted on Mar 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Parking lights, tail lights, and dash lights dont work


i assume you have checked all lighting fuses. if you have not, start there. do you have brake lights? if you do have brake and head lights then i would suspect the dimmer/light switch.

Mar 31, 2014 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

How do I fix brake lights on my 2001 Dodge Ram? I have tail lights but no brake lights. I checked the fuse & its not blown.


do the signals lights work at the back if so then it sounds like you have a bad brake light switch or its out of adjustment. the brake lights and the signal lights work the same bulbs but are controlled by different circuits. the switch is located under the dash at the base of the steering colume were the brake pedal pushes against the switch.

Mar 06, 2014 | Cars & Trucks

1 Answer

2001 Dodge Ram Van. The brake lights stopped working.


hello
you need to replace the body control mogule located under the dash on the left side by the break pedel

Jul 11, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Would a blown fuse be the cause of a Dodge 1500 losing tail light


Hello. Definitely check the fuses, but also check the ground for the lights in the rear end as your symptoms could also be the result of a poor ground.

Nov 23, 2009 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

Rear tail lights


Yes, The tail light works on a different part of the bulb than the brake light. That bulb has a burned out tail light filiment. Needs to be replaced.

Nov 12, 2009 | 2002 Dodge Ram 3500 Truck

1 Answer

Dodge ram 1500 tail lights don't work


i had the same prob with my 2002 dodge ram and i was told that it was the fuse box which cost 700 to 800 bucks.Ifixed mine with a relay switch and about 6 feet of wire
. works like new

Jan 18, 2009 | 2002 Dodge Dakota Club Cab

1 Answer

Tail light works but no brake light on2003 Dodge Ram 1500


if it has a trailer package look at the splitter when you take off the tail light cover might be that plug.

Dec 20, 2008 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

No tail lights,marker lights (FRT. OR REAR), license plate light


broken wire, bud .at the rear end their should be a ground wire bad, broken or cut get back to me.

Nov 23, 2008 | 2002 Dodge Ram Maxi

1 Answer

Tail lamps and front corner lamps inop


If the fuse was melted, I doubt that all 4 bulbs went bad at once. It sounds like you have a short circuit there. The power goes from the fuse, up to the head lamp switch and then to the 4 lamps. Check to see if the headlamp switch is working properly.
Charlie

Nov 16, 2008 | 2002 Dodge Ram Maxi

Not finding what you are looking for?
2002 Dodge Ram Maxi Logo

650 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...