Question about 2006 Toyota RAV4

1 Answer

Tail Assembly how to replace right tail assembly on RAV4

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

Remove the interior trim panel that faces the taillamp.

Remove the 3 nuts from the studs that holds the lamp onto the body

Remove the wiring connector

Detach the clip at the top outer edge, and pull the lamp straight out.

Easy to do. Glad to help; and, thanks for choosing FixYa.

Posted on Nov 03, 2008

1 Suggested Answer

  • 1986 Answers

SOURCE: How do you replace rear tail light assembly?

Open the trunk and along the bottom of the tail light, there should be a Philips screw securing a cover piece. (your car may or may not have this piece)
With the cover off, there will be another 2 screws securing the bottom of the tail light assembly. Remove the screws and pull the bottom out and the top is held in by two retainers that should just slide right out

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove 2010 toyota tail light assembly


Either 2 screws on side of assembly when door is open or behind assembly on inside will b 3nuts u must loosen and assembly should fall out.. may have to slightly pry on edge of light to pull a tab

Aug 31, 2014 | 2010 Toyota RAV4

1 Answer

Can not get the broken tail light out of my rav4 2002


Tail light assembly or just the light bulb?
There may be 10 mm nuts holding the light assembly to the car.
Usually 2 or 3 nuts hold in the assembly.
Small panel out should gain you access to the bulbs.

Feb 21, 2013 | 2002 Toyota RAV4

1 Answer

I need to replace rear tail light assembly on 2011 Toyota RAV4 how is easiest way to do this?


take out the side plastic cover (between back seat & the tail light)
and take out the smaller black cover. hope this helps you !

Dec 03, 2011 | 2011 Toyota RAV4

1 Answer

How do i replace the tail light bulb?


to replace the GM tail light bulb, you will drop down the tail gate and you will notice 2 screws on the tail light assembly, you will remove those 2 screws with the proper screw driver, once you do that the whole tail light assembly will come off, then you will see onother 2 screws holding the light panel to the tail light assembly, or brackets holding the light panel to the tail light assembly remove either or and you will have access to the three bulbs on that light panel, replace the burnt one and follow the same intrunctions to put back.

Apr 06, 2010 | 2005 GMC Canyon

1 Answer

How do you replace rear tail light assembly?


Open the trunk and along the bottom of the tail light, there should be a Philips screw securing a cover piece. (your car may or may not have this piece)
With the cover off, there will be another 2 screws securing the bottom of the tail light assembly. Remove the screws and pull the bottom out and the top is held in by two retainers that should just slide right out

Oct 13, 2009 | 2001 Toyota RAV4

2 Answers

How do I replace right tail light bulb on VW Beetle?


The entire tail light assembly pulls out from the fender well. You can access the socket for the tail light on the inside of the trunk, but in order to change the bulbs you will need to pull the tail light assembly out from the socket. Check inside to see if there are any retaining straps, otherwise use your fingers to get under the outer edge of the tail light assembly and gentlu pull it out. Don't pull too far because the wires will still be connected between the tail light assembly and the socket. The bulbs are then easily accessible and can be changed. Reverse the procedure to re-install.

Jun 06, 2009 | 2000 Volkswagen Beetle

1 Answer

Replace Tail light assembly


Loosen ther interior plastic to gain access to the 2 hidden nuts. We use an articulated ratchet to get to the bolts, however. Not hard to do.

Aug 10, 2008 | 2006 Toyota RAV4

2 Answers

Process to get to tail light bulb for replacement on 99 rav4. Do you have to remove the paneling in the rear compartment?


Well, this is rather embarassing but I simple decided to look through the owners manual thinking that they usually don't contain that sort of thing and there I found. Pictures and a description of the process. Very simple...remove a phillips screw to remove a small plate covering the 2 screws that hold the tail light assembly in place. Remove the 2 screws and pull our the assembly and replace the bulb. Duh....I thought with Toyota engineering, they wouldn't make replacing a bulb a major project. Thanks for checking back....Allen

Aug 05, 2008 | 1999 Toyota RAV4

1 Answer

How to remove tail light assembly??


how do I remove Tail Light Assy from my Rav4 2005 help needed

Jun 16, 2008 | 2004 Toyota RAV4

Not finding what you are looking for?
2006 Toyota RAV4 Logo

Related Topics:

342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...