Question about 1996 Chevrolet Blazer

2 Answers

No power t my 96 chevy blazer

I just bought my truck Friday and hauled it to my house. I have a 1996 chevy blazer s10 style with a 4.3L vortec engine in it. The problem is it has no power at all. No lights,no radio,turn signals NOTHING. We thought or it is a ground wire that wasn't hooked up correctly but we have only found 2 main wires. I need any ideas of what could be wrong with my truck so I can get it running PLEASE HELP ME

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You are right. there is four ground wires on the 96 two that come off the batterie and one on each back side of the heads. The two on the back of the heads are a pain in the but but you can get to them. It has to be a wire not working if you have nothing at all. Also look under the fire wall on the driver side. there is a block of wires that needs to be pluged in and a bolt holds them together. make sure the bolt is tight.

Posted on Feb 19, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try the altenater.had the same problem with my 96 blazer

Posted on Nov 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 Chevy blazer with a 4.3 vortec motor it has a small leaking head gasket how long can I drive it until I have the money to fix it.


Troubleshooting a Blown Head Gasket (GM 4.3L, 5.0L, 5.7L)

troubleshootmyvehicle.com > GM > 4.3L, 5.0L, 5.7L
Mar 28, 2011 - There are so many ways to test for a blown head gasket on your 4.3L, 5.0L, 5.7L GM van (or mini-van, pick up, SUV) that it can get confusing.

Chevy Blazer Coolant Leak (Intake Manifold) - YouTube

? 4:33
https://www.youtube.com/watch?v=SC4VXdt5wiE
Oct 9, 2013 - Uploaded by eyetotheworld
I have localized a coolant leak on my 2003 Chevy Blazer to thegasket of the intake ... Turns out that this is common among this particular engine both in the v6 & v8 sizes. ... The guy has been generous to detail his projects. ... 98 S10 Vortec V6 4.3 IntakeGasket Replacement Part 1 of 5 - Duration: 18:17. by ...

Chevy 4.3l v6 oil leak issue 2001 Xtreme Blazer - YouTube

? 6:11
https://www.youtube.com/watch?v=Y8Ogd5voIYs
Nov 12, 2011 - Uploaded by smiatacz
This darn little engine just keeps going. ... I have a 2003 chevy blazer and the oil cooler line from the oil filter to ... I have a 95 Chevy s10 v6 vortec 2wd that is slightly dripping oil out of agasket ... I'm having same problem 2001 Chevy Blazer 4x4 (not xtreme) not sure if those same bolts are missing on mine.

Dec 28, 2015 | Cars & Trucks

1 Answer

Will a '92 4.3 Vortec motor fit in a '96 4x4 Blazer?


Yes it will bolt up but NO it won't run . The 96 has a crank sensor hole in the timing cover the 92 does not . The timing covers are not interchangeable (different bolt pattern ) . You would have to change complete wiring harness including computer all the way to the OBD diagnostic port . It will work but a LOT of work .

Mar 27, 2017 | 1996 Chevrolet Blazer

1 Answer

My 96 s10 blazer has fuel pressure to the injectors whitch are spider injectors but will not start


I had a 2000 chevy Blazer that had the same problem. I ended up replacing the spider injectors from the local parts house and solved my problem. The computer was sending to open them but they didnt in which it wouldnt run. Hope that helps.

May 19, 2011 | 1996 Chevrolet Blazer

2 Answers

I had a mechanic check my car and he said it might be the #5 injector that was missing (1998 chevy blazer)


The 98 chevy blazer has a one spider injector that runs to six poppit valves where the fuel is injected into the cylinders.It is possible that the poppit valve may become plugged. Before looking into this more I would verify that the spark plug or wire is not the cause of your cylinder #5 misfire.

May 18, 2010 | Cars & Trucks

1 Answer

I have a 96 chevy blazer with a 4.3 vortec rough


Do a compression test on all of your cylinders when it is cold. Backfiring is a sign of a worn valve seat allowing mixed fuel and air (lit by spark) to be forced back into the intake. You will probably see compression loss on one or more cylinders.

Also... there is a chance that the EGR valve is not totally seated when the engine is cold with just a small blow by. The EGR valve seats coke up over time with black gunk.

Jan 28, 2010 | 1996 Chevrolet Blazer

1 Answer

89-98 chevy blazer


It's not worth doing all that conversion, buy the time you spend the time and money to convert the 89 4.3 to work on the 98 blazer, it would be cheaper to install a 98 vortec rebuild. The 89 4.3 have a TBI fuel injection system and the ecm on the 98 will not work and the bad news is that the ecm on the 98 also controls the transmission shift points and the 89 will not, so even if you swap the ecm to have the 89 4.3 engine work. the transmission will not shift. Sorry for the bad news but it would be cheaper to replace the 98 engine with the years of 1996 to 2001. Good luck and hope this helps. 

Jul 21, 2009 | 1989 Chevrolet S-10 Blazer

4 Answers

96 chevy blazer 3rd gear and overdrive slipping


i got a 1996 chev. blazer s-s10 4.3 engine 4x4.problem i got is i got 1st 2nd & overdrive & reverse but no 3rd gear what should i do

Jun 30, 2009 | 1996 Chevrolet Blazer

2 Answers

1996 chevy blazer ls s10 style


In the engine bay fuse box there is a big fuse called the Main Fuse. Check that first, can blow if the battery gets shorted out or something like that. Just an idea really, hard to diagnose without the vehicle in front of me.

Nov 03, 2008 | 1996 Chevrolet Blazer

1 Answer

1996 Chevy S10 stalls out 3 times before steady start


check for loose or cracked vacuum lines, and/or the rotor. It may not be making consistant contact.

Oct 08, 2008 | 1996 Chevrolet Blazer

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

391 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...