Question about 2004 Pontiac Grand Prix

3 Answers

No start started 4 wks ago car would cut off, change cam and crank sensors, last week finally no start. I have replace throttle postion assembly started but now even the starter is acting up, acts like a ground problem

Posted by on

  • 1 more comment 
  • hugoespinoza Nov 08, 2008

    found throttle position assembly connector loose now cranking better but still no start

  • hugoespinoza Nov 15, 2008

    all that is good

  • Anonymous Mar 13, 2014

    WILL NOT CRANK AFTER REPLACING THE ALTANATOR. STARTED IT UP AND PUT IN GEAR AND IT QUITE ACTS LIKE STARTER PUT CAN JUMP SOLNOID BUT WILL NOT START EVEN WITH EITHER

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have same problem starting 98 olds intrigue, i believe it is the safety switch on the transmission. about 40 bucks

Posted on Feb 14, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 275 Answers

Does it have a bright blue spark on all the plugs

Posted on Nov 17, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 275 Answers

Check the coil packs for ground

Posted on Nov 03, 2008

  • Walter Morris Nov 12, 2008

    Check to see if the plugs and wires are good and check the fuel pressure

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car stops while driving have just replaced throttle under a week ago and it has done it again


if engine starts straight after then its a cam or crank sensor.( running in limp mode 2000-3000revs)

Oct 10, 2013 | Opel Astra Cars & Trucks

1 Answer

Vauxhall vectra 2006 cam sensor


I have had this before it is best to change the cam and crank sensors as a pair. as a week sensor will affect the other sensor.and give a false code. as these work together. it is best to change both at the same time. i changed the crank on mine after the cam and it sorted it out. crank sensor is located near to the thermostat and under the exhaust manifold. make sure you tuck the wire away from the exhaust manifold . other end of the wire is fitted to the under neath of the injector cover and is cliped in place very easy to replace

Jul 27, 2013 | Vauxhall Cars & Trucks

1 Answer

Our 2000 xterra stalled out while driving and wont stay started now. anyone know whats wrong?


either crankshaft postion sensor camshaft postion sensor sometimes tho cars just have a crank sensor and it does the cam sensor job to

Jan 14, 2013 | 2000 Nissan Xterra

2 Answers

Went to see wat was wrong with my 1999 chevy cavaliar they diagnoised it with the proble of having a crank and camshaft postion sensor problem started right up for a day then stauled out and wouldnt start...


thats corret replace crank postion sensor and cam postion senosr as they both cause hard start and no start situations the cam sensor is very easy to change crank sensor needs to have harmonic balancer pulluy removed and then remove sensor and reinstall new sensor easy but you need a removal tool and install tool for that pully can be rented at autozone its free its just a depostit i hope it helps


please 4 thumbs allows me to continue to help you

May 13, 2011 | 1999 Chevrolet Cavalier

1 Answer

2002 trailblazer 4.2 4wd i have a code p1345 that keeps returning ive replaced the cam postion sensor and the crank sensor and the cam postion actuator solenoid i just put the cam position actuator...


beleive it or not changing the oil if dirty will solve this code, also found that connector gets oil in it and that also makes p1345 code turn on, open connector and look for oil in it,look at sensor and actuator plugs for oil,the main plug connector is the actuator plug it fills with oil and makes contact between pins setting p1345 code, hope this helps.

Jun 17, 2010 | 2002 Chevrolet TrailBlazer

1 Answer

Oil light flashing, last oil change 7 wks ago


I belive they didn't reset the oil light timer. I belive the sequence is 1. key on (not acc with engine off)
2. step on the brake pedal 5 times within 10 seconds. 3. key off. 4. start car. 5. check if the light went out. you may have to try it a few times to get it.

Jun 25, 2009 | 2003 Pontiac Grand Am

5 Answers

2005 altima


A common problem on this vehicle is failure of the Crankshaft Position (CKP) Sensor. Failure of the CKP Sensor will result in the vehicle not starting. The cost to repair the CKP Sensor is estimated at $29.13 for parts and $26.00 for labor.

Jun 29, 2008 | 2005 Nissan Altima

Not finding what you are looking for?
2004 Pontiac Grand Prix Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...